Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Tacony Homeowners
A missing or cracked cap and a crumbling crown let water straight into the top of a chimney, and in this part of Philadelphia that water freezes and expands every winter until the masonry starts coming apart. Our technicians have up to 13 years of experience with caps and crowns on the rowhouses and older detached homes around Tacony, so we know what a decaying mortar bed under a cap looks like before anyone climbs the roof. We diagnose the whole chimney, not just the part you can see from the street, and we show you photos of what we find. Cap and crown work is often done the same day the weather cooperates. Call (833) 370-3312 to book a sweep or a repair. We answer 24/7.
What Our Chimney Cap & Crown Service Includes
A cap and a crown are two different parts doing two different jobs. The cap is the metal hood on top, and the crown is the concrete or mortar slab that sheds water away from the flue. We handle both, plus the custom and multi-flue work that older Tacony roofs often need.
Cap Installation
A chimney cap is the metal or stainless hood fitted over the flue opening with a mesh screen, and it keeps rain, squirrels, birds and nesting debris out of the chimney while letting smoke escape. Every open flue needs one; an uncapped chimney is an open door for water and wildlife. We size the cap to the flue’s actual dimensions, set it on a stable base, and check that the screen and spark arrestor are clear before we leave the roof.

Cap Replacement
Cap replacement is for a cap that has rusted through, lost a leg in a windstorm or simply stopped fitting the flue it was meant to protect. A loose cap rattles, blows off in a strong gust and exposes the flue for however many days it takes someone to notice. We pull the old cap, check the flue tile and crown beneath it, and install a new cap that matches the flue and the chimney’s proportions.

Crown Repair
A crown repair fixes the slab of masonry at the very top of the chimney, which is the part that channels water off the structure. Hairline cracks, a crown that has pulled away from the flue tile, or mortar that has gone soft all let water get behind the masonry, where freeze-thaw cycles do the real damage. We remove loose material, rebuild the failed areas with proper bonding and form a slope that drains, because a crown that does not shed water is a crown that will fail again.

Crown Coating
Crown coating is a protective membrane applied over a crown that is otherwise sound but showing surface cracks or minor wear. The coating seals those small openings before water gets in and gives the crown a few more years of service before it needs rebuilding. We only recommend coating when the crown is still solid underneath; if the slab is crumbling or detached, a coating would just hide a bigger problem.
Multi-Flue Cap
A multi-flue cap is a single larger cap that covers two or more flues in one chimney, which is common on the broad masonry stacks around Tacony. One cap over the whole stack is often stronger and better looking than several small caps crowded together. We measure the full stack, build the cap to span it, and make sure each flue still draws properly once the cap is on.
Custom Cap
A custom cap is built for a chimney whose size, shape or flue layout will not take a standard off-the-shelf cap. Odd stack dimensions, unusual flue tile arrangements and chimneys with multiple flues at different heights all call for something made to fit. We take measurements on the roof, match the cap to the chimney and install it so it sits level and seals against the weather.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with professional-grade components rather than whatever a general handyman happened to have on the truck. Gelco and Olympia Chimney make caps and crown components that hold up to Philadelphia winters, and we know where those products wear out: the seams at the corner legs, the screen mesh where soot collects, and the fasteners that rust first. When we install a cap, we install it knowing what the hardware is meant to do over the long term, not just that it looked good going up.
For crown and masonry work we rely on materials from Famco and Copperfield, both names professional chimney contractors use for crown and structural components. That matters because a crown is only as good as the mix and the drainage slope under it, and a cap is only as good as the base it rests on. Whether you have Gelco, Olympia Chimney, Famco, Copperfield or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water stains on the ceiling or smoke chamber. A stained ceiling near the chimney or water marks inside the firebox point to the cap or crown letting water past the top of the system. That water travels down the flue and into the masonry, so the stain is usually the visible end of a problem that started on the roof.
- Visible cracks or a tilting crown. If the crown slab is cracked, separating from the flue tile or sloping toward the chimney instead of away, water is pooling where it should run off. A crown that tilts is a crown that needs repair, not a coat of paint.
- Rust, missing hardware or a bare flue opening. A rusted-out cap, missing mesh or, worse, no cap at all leaves the flue wide open to rain, squirrels and birds. Animals nesting in a flue are a fire hazard and a chimney-blocking problem.
- Pieces of masonry on the roof or in the yard. Flakes of mortar or chunks of crown material on the roof shingles are the crown telling you it is failing. Frost and thaw cycles work on a weakening crown fast in this climate, so this one is worth checking before winter.
- Birds, squirrels or nests in the chimney. Scurrying or chirping from the chimney means something has moved in through an uncapped or broken-capped flue. It needs to come out and the opening needs a proper cap with a secure screen.
Our Chimney Cap & Crown Process – Step by Step
- 1
Book the visit and get the details. We ask what you are seeing, where the symptoms show up and what the chimney is used for. That tells us whether the problem is the cap, the crown or something deeper, and what to bring on the roof. We answer 24/7, so call whenever the issue comes up.
- 2
Inspect the chimney from both ends. Our technicians check the cap, crown, flue tile and flashing from the roof, then look up and check the condition of the flue from the firebox. Photos and notes go with the visit so you can see what we see before any work is recommended.
- 3
Explain the findings and the options. We walk you through what we found: a cap that needs replacing, a crown that needs repair or coating, or a masonry issue that needs more. You get a written estimate before anything is done, and we tell you plainly if a repair can safely wait.
- 4
Do the work with the right materials. Cap installation and replacement, crown repair and coating, and multi-flue and custom caps are all handled with components from makers like Gelco, Olympia Chimney, Famco and Copperfield. We set fasteners properly, form the crown slope to drain, and make sure the cap base is solid.
- 5
Check the result and clean up. Before we leave, we test that the cap sits securely and the flue still draws, then confirm the roof and surrounding areas are clear of debris. If we found something separate, like a liner issue, it goes in the report so you know what it is and what it costs.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Tacony?
Most cap and crown work in Tacony falls in a range that depends on what is being replaced and how much access the roof allows. A standard cap installation typically runs about $250 to $550 depending on the cap size and material, while crown coating sits around $350 to $650 based on the crown’s condition and square footage. A full crown repair or rebuild usually lands between $550 and $1,200, and multi-flue or custom caps run higher because of the custom fabrication and fit. These are typical estimates, not final prices; the written estimate we give you sets the final number.
What moves the price is the size of the crown, the number of flues, whether old materials have to be cut out and hauled away, and how steep or difficult the roof is to work from. The way to avoid overpaying is to get a written estimate with the scope spelled out line by line, so you know what is being replaced and why. Our estimate is free, and it covers the cap, the crown, the flue tile and the flashing so nothing gets dropped from the job only to surface later.
Chimney Cap & Crown Near Tacony – Our Service Area
We serve Tacony and the neighborhoods around it, including Holmesburg, Frankford, Mayfair, Rhawnhurst, Fox Chase, Oxford Circle, Olney, Kensington, Torresdale and South Philadelphia, plus Cheltenham Village just over the line. Response depends on the schedule and the weather for roof work, and we book the visit around when we can get the job done safely. For related work across the city, see our pieces on chimney cap & crown and chimney cap & crown.
Serving Tacony, PA – Our Local Coverage Area
We serve Tacony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Tacony
Chimney cap and crown service covers the two parts at the top of the chimney: the cap that sits over the flue opening and the crown that caps the masonry around it. The cap keeps rain, animals and debris out, and the crown sheds water off the whole stack. Together they are the chimney’s first line of defense against water damage. Our technicians inspect both and recommend only what the condition calls for.
Most cap installations and crown coatings are done in a single visit of a couple of hours, while a crown rebuild or custom cap can take longer once old material is removed and new material is formed and set. The exact time depends on the crown size, the number of flues and the roof access. We tell you the expected time when we give you the written estimate. Call (833) 370-3312 for an exact quote; estimates are free.
Cap installation typically runs about $250 to $550, crown coating about $350 to $650 and a crown repair or rebuild about $550 to $1,200, with multi-flue and custom caps priced higher. The written estimate we give you sets the final price, and the estimate is free. Nothing moves forward until you have that number in hand. Call (833) 370-3312 for an exact quote; estimates are free.
Yes, we service Olympia Chimney caps and components, and we know where those products wear out first. We also work with Gelco, Famco, Copperfield and other professional-grade makes, so we can match a repair or replacement to the system you already have. Whether you have Olympia Chimney or another make, we can help.
Same-day cap and crown work is possible when the schedule and weather allow, and we book the visit around that. We answer 24/7, so a call always reaches us, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind the work we do, and warranty terms are spelled out in the written estimate before any work starts. Specific coverage depends on the material and the repair, so we tell you exactly what applies to your job rather than a blanket promise. Ask us when we give you the estimate, and we will cover it clearly. Call (833) 370-3312 for an exact quote; estimates are free.
You don’t need to do much beyond clear access to the fireplace and the roof area if that’s practical. Tell us anything you have noticed, like water stains, a draft or animals in the chimney, and let us know if the fireplace has been used recently. We handle the rest, from the roof inspection to the cleanup. Call (833) 370-3312 to book a visit.
Schedule Your Chimney Cap & Crown Service in Tacony Today
A sound cap and crown protect the rest of your chimney from the top down, and putting them right early saves the masonry from a much larger repair later. Our technicians check the whole system, show you the evidence and give you a written estimate before anything is done. Call (833) 370-3312 for a free, no-obligation estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm. You can also see our full service on the Chimney Sweep Tacony page, or our work on chimney cap & crown and chimney cap & crown around the area.
Written by the team at Chimney Sweep Tacony.