Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Bustleton
If your Bustleton chimney is smoking back, the crown has gone crumbly, or a mason told you the whole stack needs rebuilding, start with the phone and start with the evidence. We repair chimneys on the post-war stone and brick houses that make up most of Bustleton, and we don’t quote a reline or a rebuild until you’ve seen the camera footage yourself. Our technicians have up to 13 years of experience, and they work the flues and exterior stacks you’ll find here rather than assuming newer-construction layouts. Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bustleton Homeowners Call Chimney Sweep Tacony for Chimney Repair
Most of the chimney problems we see in Bustleton come from old flues meeting newer appliances, not from anything a homeowner did wrong. A 1960s stone chimney was built for an open hearth, then an insert got dropped in a decade later and nobody resized the flue. That mismatch is the single biggest source of bad draft, smoky rooms and premature liner cracking in this part of Far Northeast Philadelphia.
That’s also where the trade gets pushy. An oversized, unlined stack is easy to talk a homeowner into replacing for several thousand dollars whether or not it needs it. We go the other way: a Level 2 inspection with a camera, the footage shown to you, and a plain explanation of what’s cracked and what’s just dirty. Sometimes the honest answer is nothing needs doing this season.
Response to Bustleton is straightforward. We answer the phone around the clock and dispatch Sunday through Friday from 7am to 7pm, closed Saturday. When a chimney in Bustleton fails before burning season, we book the work and turn up with the right equipment for a masonry stack, not a parts-run guess.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Bustleton
Mortar Repointing in Bustleton
Repeated freeze-thaw winters are hard on the joints between brick and stone, and Bustleton chimneys show it first at the top of the stack where the most weather hits. Repointing cuts out the failed mortar and repacks it with a mix matched to the original, which matters on softer mid-century brick that won’t tolerate a hard modern mortar. Done early, repointing is a modest repair. Left alone, water gets behind the brick and the conversation turns to rebuilding.

Spalling Brick Repair in Bustleton
Spalling is the face of the brick flaking off, and in Bustleton it’s rarely cosmetic. Once a brick’s face is gone, water soaks into the softer core and travels toward the flue, which is how a masonry problem becomes a liner problem. We replace the broken units and treat the surrounding stack so the repair holds through the next hard winter, rather than patching the surface and calling it finished.

Chimney Waterproofing in Bustleton
Summer humidity and fall leaf debris do their own damage between heating seasons. A breathable waterproofing treatment on the exterior masonry slows water absorption while letting the brick dry from inside, which is the right approach on older Bustleton stacks. We waterproof after any repointing or spalling repair is done, not before, so we’re not sealing a problem in.

Flashing Repair in Bustleton
The flashing at the roof line is where a lot of “chimney leaks” actually start, and on the pitched roofs common in Bustleton it’s the joint that fails first. We replace the flashing and the counter-flashing rather than smearing sealant over a gap. A failed flashing joint lets water run straight down the outside of the flue, where it rusts dampers and damages the firebox.
Trusted Brands We Service in Bustleton
Chimney materials are not interchangeable, and the brands we install tell you what kind of work we do. We fit DuraFlex flexible liner systems where a rigid liner won’t go, resurface with HeatShield before recommending full replacement, and work with Olympia Chimney and Famco components when the job calls for them. That matters on a Bustleton retrofit where the flue was never sized for the insert. We don’t claim to keep parts in stock; what we do is specify the right system for your chimney and turn the work around without putting you at the back of a long queue. Professional-grade materials installed by trained hands.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Bustleton Homes
- Original clay-tile flues cracked or oversized for a later insert. Post-war Bustleton houses mostly still have their mid-century clay-tile liner, and a 1970s insert was often dropped in without relining. The stack drafts poorly until a correctly sized stainless liner goes in, which is why the fix is a liner decision, not a cleaning one.
- Spalling brick and crumbling mortar on the exterior stack. Bustleton’s freeze-thaw cycles open joints and pop brick faces, and the damage is commonly filed under cosmetic while water is already reaching the flue behind it. Repointing and brick replacement caught early keep a masonry repair from becoming a rebuilt stack.
- Cracked crowns and failed caps letting weather into the flue. A cracked crown and a missing or rusted cap send summer humidity and fall leaves straight down the chimney. That’s the entry point for rusted dampers and blocked flues, and it’s an inexpensive repair compared with what a season of water does inside.
- Third-degree creosote glazed onto the flue walls. Creosote comes in three degrees, and third-degree is a tar glaze a brush won’t touch. Catching first-degree buildup on an annual sweep is the whole point of the visit, because the later stages change the repair entirely.
Pricing for Chimney Repair in Bustleton, PA
Chimney repair in Bustleton is priced per job from a written estimate, and the ranges below are typical for this market, not a final number. What moves the price is how much of the stack is affected, whether scaffolding is needed, and whether the repair turns out to be exterior masonry or a liner decision. A typical mortar repointing on a Bustleton chimney runs $450 – $1,200 depending on how many joints are open and how high the work goes. Spalling brick repair with new units typically runs $600 – $1,800. A new chimney crown and cap together usually fall in the $400 – $1,100 range, and flashing repair runs $350 – $900. A correctly sized stainless liner for a mid-century retrofit runs $2,500 – $5,500. Chimney rebuilding, when it’s genuinely needed, starts around $6,000 and climbs with height and access. The written estimate sets the final price, and the assessment itself is free.
We Also Serve Cities Near Bustleton
We work the same post-war masonry across the surrounding Northeast Philadelphia neighborhoods, including Northeast Philadelphia, Rhawnhurst, Torresdale and Fox Chase, and you can read more about our Bustleton coverage and how we schedule in the area. If you’re just outside those lines, call and we’ll tell you straight whether we can get to you. Our chimney repair team handles the whole system, from cap and crown down to the firebox.
Serving Bustleton, PA – Our Local Coverage Area
We serve Bustleton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Bustleton
Usually yes, but only after the camera confirms it. In a Bustleton house of this age the original clay-tile flue is often oversized for the insert that was retrofitted into the firebox, and an unlined or mismatched stack drafts poorly and lets creosote collect in the wrong places. The right answer depends on what the footage shows: a sound, correctly sized flue may only need cleaning, while a cracked or oversized one needs a properly sized stainless liner. We don’t recommend a liner you haven’t seen the reason for. Call (833) 370-3312 for an exact quote; estimates are free.
A Level 2 inspection shows you the inside of the flue on camera, plus the exterior masonry, crown, cap, flashing and firebox, which is what an older Bustleton chimney needs. You see the cracked tile, the oversized flue, the joint that’s open, rather than hearing about them secondhand. That footage is the whole basis for any recommendation we make. Call (833) 370-3312 for an exact quote; estimates are free.
The mortar goes first because it’s softer than the brick, and Bustleton’s repeated freeze-thaw cycles work the joints hardest at the top of the stack. Water gets in, freezes, expands and pushes the joint open, while the brick faces themselves may still look intact. That’s exactly why repointing early is cheaper than waiting for the brick to spall. Call (833) 370-3312 for an exact quote; estimates are free.
It’s a real repair issue. A cracked crown and a missing cap are the front door for summer humidity and fall leaf debris, and once water is inside the flue it rusts dampers, damages the firebox and speeds up spalling on the exterior. Crown and cap work is one of the cheaper repairs on a chimney and one of the most effective at preventing bigger ones. Call (833) 370-3312 for an exact quote; estimates are free.
You ask to see the camera evidence before anything is quoted, and a straight contractor will show it to you. If a quote for a full rebuild comes without footage of what’s wrong inside the flue, treat that as a question, not an answer. We diagnose the system, not just clean the flue, and we’ll tell you plainly when a repair can safely wait a season. Call (833) 370-3312 for an exact quote; estimates are free.
When you call, you’ll get a straight read on what your Bustleton chimney actually needs, and the price comes in writing before any work starts. Call (833) 370-3312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.