Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Frankford
If your Frankford rowhouse has a cracked crown, crumbling mortar, or a chimney cap that disappeared years ago, the repair is usually smaller than you fear. We handle chimney repair across Frankford, from mortar repointing on an original brick stack to full rebuilds where the masonry has gone too far. Our technicians have up to 13 years of experience, and we diagnose the whole system instead of cleaning the flue and moving on. Frankford’s tight rowhouse blocks call for a repair-only approach, because most chimneys here don’t need a new stainless liner. They need the brick and mortar put back where they belong. Call (833) 370-3312 for a free estimate.
Why Frankford Homeowners Call Chimney Sweep Tacony for Chimney Repair
Repair work in a party-wall rowhouse neighborhood is a different trade from repair work in the suburbs, and that difference is the reason people in Frankford call us. When we’re on a block, we’re often documenting two or three adjacent stacks on the same wall, because water that enters one crumbling crown travels into the shared masonry beside it. That kind of patience with neighbors and party walls is not something a generalist handyman brings to the job.
We also bring the material knowledge that comes with working in professional-grade products every week. HeatShield resurfacing is a real repair pathway before anyone starts talking about a full reline, and if the camera shows a crack that a resurfacing can’t fix, we’ll tell you that too. Nothing gets recommended that you can’t see on the inspection camera yourself. Our technicians have up to 13 years of experience, the estimate is free, and the written estimate sets the final price before any work begins. Frankford residents deserve that clarity, especially on older homes where the sales pitch usually outruns the evidence.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Frankford
Mortar Repointing
Mortar repointing is the workhorse repair on Frankford’s rowhouse chimneys. Original 1920s brick stacks shed their joint mortar first at the top course, where rain and freeze-thaw cycles do the most damage. Repointing means cutting out the failed mortar and packing fresh material into the joints, matching the existing brick so the stack looks whole again rather than patched. On a Frankford block, we look at the flue side and the neighbor’s side of the shared wall, because a joint that looks sound from your yard is often hollow on the other face.

Spalling Brick Repair
Spalling is what happens when water gets inside a brick and freezes, popping the face off in layers. Frankford’s humid Mid-Atlantic summers and hard winters are punishing on exposed rowhouse stacks, and the failures usually show up in spring and fall after the moisture freezes. We replace spalled units with brick of the right density and match, not just any brick pulled off a shelf. If only a few bricks are gone, the repair stays small; if the spalling runs deep, we’ll show you on camera where it stops.

Chimney Waterproofing
Waterproofing is the cheapest line of defense a Frankford homeowner has against the next winter. A breathable masonry sealer lets moisture vapor escape while keeping liquid rain out, which slows the freezing that cracks brick faces and opens joints. We only recommend waterproofing once the masonry is sound, because sealing over active spalling traps moisture and makes the damage worse. Cap and crown work usually goes hand in hand with it, and Famco components fill the gaps in an older assembly.

Flashing Repair
Where the chimney meets the roofline, the flashing is what keeps roof water from running down the stack and into the house. Original flashing on old Frankford rowhouses is often tar or roofing cement that hardened decades ago and pulled away from the brick. Repairing it properly means new metal flashing set into the brick joints with a counterflashing over the top, not another layer of sealant. When the flashing is right, the masonry above it dries out and the leaks near the ceiling stop.
Trusted Brands We Service in Frankford
We work with a vetted roster of professional-grade chimney brands: DuraFlex flexible liner systems for older or non-standard flue configurations, HeatShield for liner resurfacing, Olympia Chimney components, and Copperfield and Famco parts for caps, crowns, and connections. Using recognized trade brands means the repair is built from parts other chimney contractors also stand behind. We don’t stock parts locally, so we order exactly the component the job calls for and get it moving quickly. That approach keeps the turnaround tight without pretending there’s a warehouse on every block. Every part we install is the part the camera evidence said you needed.
Common Chimney Repair Problems We See in Frankford Homes
- Eroded crown mortar on exposed stacks. A crown that has gone soft lets rain straight into the masonry, and the water freezes the brick faces off from the inside. On Frankford’s party-wall blocks, a failed crown often spreads damage sideways to the neighbors’ chimneys sharing the same wall.
- Original clay-tile flues venting modern gas appliances. Many Frankford chimneys were built for coal and now carry a gas furnace or water heater, and the old lining isn’t sized or sealed for it. Draft problems and carbon monoxide risks go unnoticed until a Level 2 inspection with a camera turns them up.
- Missing or damaged caps. Without a cap, rain and debris wash down the flue, creosote builds up faster, and mortar above the flue deteriorates from the inside. We see plenty of caps that were never installed or blew off years ago and were never replaced.
- Liner cracks misdiagnosed as requiring a full stainless reline. Older chimneys often get pushed straight to replacement when the failure is in the masonry joints, not the liner itself. Camera evidence tells the difference, and it’s the difference between a repointing job and a liner bill.
Pricing for Chimney Repair in Frankford, PA
A chimney repair in Frankford typically runs from around $350 for small flashing or cap work up to $2,800 – $6,000 or more for a partial rebuild of a failed stack. These are typical estimates, and the written estimate sets the final price once the camera inspection is done. The rowhouse geometry here matters for cost: repairs that touch a party-wall stack often involve more setup and more masonry than the same job on a detached house.
- Mortar repointing, small section: $400 – $900
- Spalling brick repair, spot replacement: $350 – $1,200
- Chimney waterproofing: $300 – $700
- Flashing repair: $250 – $600
- Partial chimney rebuild (including new crown): $2,800 – $6,000
- Full chimney rebuild: custom quote after inspection
The estimate is free and the price is set per job by the written estimate. Call (833) 370-3312 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Frankford
Frankford isn’t the only neighborhood we cover. We connect homeowners across the area with our chimney repair specialists in Oxford Circle, Olney, Tacony, and Kensington, all within a short drive of our Frankford work. The rowhouse construction and aging brick stacks are much the same from block to block, so the same repair-first approach applies. If you’re outside Frankford, our team can still help, and our Frankford page keeps the local details straight.
Serving Frankford, PA – Our Local Coverage Area
We serve Frankford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Frankford
Spalling brick on a Frankford rowhouse usually calls for repointing and spot brick replacement, not a full rebuild. Repointing cuts out the failed mortar and replaces it, and we swap out only the bricks whose faces have broken off. A full rebuild is only on the table when the camera shows the stack is unsound through its depth, not just on the surface. Call (833) 370-3312 for a free estimate, and we’ll show you exactly what the camera saw.
You can’t tell reliably from the ground; it takes a Level 2 inspection with a camera run down the flue. Original clay tile shows as square or rectangular sections with visible mortar joints, while a reline shows as a continuous tube or a resurfaced coating. If a previous owner had heat or hot water equipment swapped, the liner may have been altered and no records kept. We run the camera and show you the footage, then say whether the liner is adequate. Call (833) 370-3312 to book the inspection.
Yes, in a party-wall rowhouse a cracked crown on one chimney can send water into the shared masonry and damage your stack too. Frankford’s chimneys sit shoulder-to-shoulder along the block, so water and debris from one failed crown migrate along the same wall and into adjacent brick. A technician doing repair on one flue often needs to document the neighboring stacks on the same party wall. If a neighbor’s crown has failed, it’s worth a look at yours. Call (833) 370-3312 for a free estimate.
First-degree creosote is a light soot and flaky deposit a standard sweep removes; third-degree creosote is a hardened, glazed layer that has to be scraped down mechanically or removed by a professional. The difference matters because glazed creosote is highly flammable and a routine sweep won’t clear it, so a chimney that looks clean may not be safe. On a wood-burning Frankford chimney, the camera inspection tells you which stage you’re facing. Call (833) 370-3312 for an assessment before you burn again.
Yes, an annual inspection is still worth doing even if you don’t burn wood, because the flue still vents gas appliances year-round. In a Frankford rowhouse with an original clay-tile flue, the risks are draft problems, cracked tile, and blocked or deteriorated mortar, none of which show up until the camera goes in. A gas furnace and water heater venting into an undersized stack is exactly the case where carbon monoxide risk goes unseen. Call (833) 370-3312 for a free estimate on a Level 2 inspection.
What a Typical Frankford Chimney Repair Involves
Most repair work on a Frankford rowhouse starts with a homeowner noticing spalling brick or eroded crown mortar on their stack, usually after a freeze-thaw winter. A qualified technician typically performs a Level 2 inspection with a camera to check the flue liner, smoke chamber, and firebox, then recommends repointing or rebuilding only the masonry that has actually failed, often documenting adjacent party-wall stacks for shared water intrusion. Because many original flues now vent gas furnaces and water heaters, the technician also verifies that the flue liner and draft are adequate for the appliances now tied into it. HeatShield or DuraFlex systems come into play only when the camera shows a gap or crack that repointing alone won’t fix. That’s the whole point: the evidence drives the recommendation, not the other way around.
Book Your Frankford Chimney Repair
If you’re ready to get the chimney looked at, call (833) 370-3312. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Every visit starts with a camera inspection and a free estimate, and the written estimate sets the price before a single brick is touched. From annual sweep to full liner rebuild, it’s one specialist, one call. We’re glad to serve Frankford and the surrounding neighborhoods, so get in touch and we’ll find the right fix for your stack.
Written by the team at Chimney Sweep Tacony.