Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Tacony Homeowners
A fireplace that smokes into the room, a pilot that won’t stay lit, or mortar crumbling inside the firebox is a sign the system needs a trained eye, not another log on the grate. Fireplace repair in Tacony usually means one of a handful of familiar problems: a damper that no longer seals, firebox brick that has spalled from years of heat cycles, a gas pilot assembly that’s given out, or a wood-burning firebox that needs relining before it’s safe to use again. Our technicians have up to 13 years of experience diagnosing exactly these faults, and we work on both the firebox and the chimney above it so you don’t have to line up a second contractor. We answer 24/7 at (833) 370-3312, and same-day repair is often possible when you call early. From annual sweep to full liner rebuild, it’s one call.
What Our Fireplace Repair Service Includes
We diagnose the whole system, not just the part that’s misbehaving. That means checking how the firebox, damper, flue, and cap work together before we recommend a fix. Here’s what each part of the repair covers.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: a pilot that won’t hold, a burner with a weak or uneven flame, a thermocouple or thermopile that’s drifted out of spec, or logs that have shifted out of position. You’ll notice it when the fireplace lights reluctantly, smells faintly of gas, or shuts itself off mid-evening. We test the gas train, ignition, and burner assembly, replace worn safety components, and confirm the venting is pulling correctly before we call the job done.
Wood Burning Fireplace Repair
Wood-burning fireplaces take more abuse than any other part of the chimney, and the firebox and damper are usually where it shows. You need repair when smoke rolls out instead of up, when the firebox walls have cracked or the brick face has spalled, or when the damper no longer opens and closes cleanly. We inspect the firebox for cracks and gaps in the mortar joints, check the damper and smoke shelf, and repair or rebuild the firebox with refractory mortar rated for the heat.
Fireplace Insert Service
An insert sits inside the firebox and depends on a properly sized liner and a tight connection to work safely. Service is due when the insert smokes, burns inefficiently, or hasn’t been pulled and inspected in years. We check the liner connection, the surround seal, and the blower if there is one, and we clean the flue the insert vents into.
Damper Repair
The damper is the metal plate that controls draft and keeps heated air from escaping up the flue when the fireplace is idle. A damper that’s stuck open, stuck shut, or no longer seals wastes energy and can let smoke back into the room. We repair or replace the damper and make sure it seats properly against the frame.
Firebox Repair
The firebox is the chamber where the fire actually burns, and its brick and mortar take the full force of the heat. Cracks, spalling, and loose mortar joints let heat and gases reach the structure behind the firebox, which is where real damage starts. We rebuild damaged firebox panels and joints with heat-rated materials so the chamber is sound again.
Pilot Light Repair
A pilot light that won’t stay lit is usually a thermocouple, thermopile, or a dirty orifice rather than a gas supply problem. You need this fixed when you have to hold the knob for a minute just to keep the flame on, or when the fireplace won’t light at all. We test the pilot assembly, clean or replace the components, and verify the safety shutoff works the way it should. Gas work is not a DIY job: an untrained repair can cause a leak or a carbon monoxide problem, so this is one to leave to a trained professional.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
Fireplace and chimney components vary a lot by maker, and knowing where each one wears out saves guesswork. We work with Gelco firebox and refractory components, which show up in a lot of older masonry fireplaces, and we know how their panels and joints handle repeated heat cycling. Olympia Chimney products turn up in liner and venting work, and we’re familiar with how their components mate up with the firebox and flue. When it’s time to replace a damper or a cap, we supply and install Famco and Copperfield components, brands used by professional chimney contractors nationwide.
Our approach to repair is the same whatever the label says. We pull the parts that are failing, show you what we found, and recommend a fix sized to the actual problem. HeatShield resurfacing comes up often on fireboxes and flues that are worn but not yet ready for full replacement, and we’ll always walk you through that option before recommending a rebuild. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
- Smoke rolling into the room. Smoke that won’t go up the flue points to a damper problem, a blocked flue, or a firebox that’s lost its shape. It’s not just uncomfortable; it means the draft is failing, and that usually gets worse with use.
- Cracks or crumbling mortar in the firebox. Hairline cracks in the brick or gaps where the mortar has fallen out let heat and combustion gases past the firebox wall. That’s the point where a small repair turns into structural work if it’s left alone.
- A pilot that won’t stay lit. If you have to hold the knob to keep the flame alive, a safety component has failed. A gas fireplace that won’t hold its pilot reliably shouldn’t be used until it’s checked.
- A damper that won’t seal or won’t open. A stuck-open damper sends your heat up the chimney all winter, and a stuck-closed one is a smoke and carbon monoxide risk. Either one is a straightforward repair when it’s caught early.
- Rust, white staining, or water in the firebox. Moisture getting into the firebox usually traces back to a failed crown or cap above. The fireplace is where the damage shows, but the repair often starts at the top of the chimney.
Our Fireplace Repair Process – Step by Step
- 1
Inspection and diagnosis. We start by looking at the whole system: firebox, damper, flue, cap, and crown. We use a camera to see inside the flue where the eye can’t reach, and we check for the clues that connect a firebox problem to a chimney problem above it.
- 2
A written scope and price. You get a written estimate that names the parts and the work before anything starts. The price is set per job, and the estimate is free. If we find something that can safely wait, we’ll tell you that, too.
- 3
The repair itself. Depending on what we find, that might be a damper replacement, firebox repointing with heat-rated mortar, a pilot assembly swap, or HeatShield resurfacing on a worn flue. We use professional-grade materials matched to the job.
- 4
Testing and verification. Once the repair is done, we test the draft, check the damper travel, confirm the gas components shut off properly, and run a smoke test where it applies. We don’t hand back a fireplace we haven’t tested.
- 5
Cleanup and a clear record of the work. We leave the area clean and tell you what we did and what to watch for next season. If a follow-up sweep or a cap repair makes sense, we’ll say so plainly.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Tacony?
Fireplace repair in Tacony typically starts with the smaller jobs and scales up with what’s actually damaged. A damper repair or replacement usually falls in the low-to-mid hundreds. Pilot light and gas component repairs land in a similar range, depending on how many parts need swapping. Firebox repointing and minor masonry work run higher, and a firebox rebuild or a HeatShield resurfacing job costs more still because of the materials and the labor. The written estimate always sets the final price, so what you’re quoted is what you pay.
Several things move the number: the size of the firebox, whether the damage is surface-level or has reached the structure, whether the repair is gas or wood, and whether the chimney above needs work at the same time. You avoid overpaying by getting a written scope up front, getting the inspection findings in writing, and asking specifically whether a repair can wait. What’s included in a free estimate is the inspection, the diagnosis, and a written price, with no obligation to book the work.
| Repair Type | Typical Price Range |
|---|---|
| Damper repair or replacement | $200 – $450 |
| Pilot light / gas component repair | $175 – $400 |
| Firebox repointing and minor masonry | $350 – $800 |
| Firebox rebuild | $800 – $2,000 |
| HeatShield flue resurfacing | $1,200 – $2,500 |
Those ranges are estimates for planning, not a quote. Call (833) 370-3312 for an exact quote. Estimates are free.
Fireplace Repair Near Tacony – Our Service Area
We take fireplace repair calls across Tacony and the surrounding neighborhoods: South Philadelphia, Mayfair, Oxford Circle, Holmesburg, Frankford, Rhawnhurst, Fox Chase, Cheltenham Village, Olney, Torresdale, and Kensington. Response times depend on the day and the job, but we book fast and same-day repair is often available when you call early. If you’re outside those neighborhoods, call and we’ll tell you whether we cover your street.
Serving Tacony, PA – Our Local Coverage Area
We serve Tacony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Tacony
Fireplace repair is fixing the parts of the firebox and its controls that have worn out: the damper, firebox brick and mortar, the gas pilot and burner, and the insert connection. It’s different from a cleaning, though we often do both at once. It covers the firebox end of the chimney system, while a full chimney sweep covers the flue above. If you’ve noticed a specific symptom like smoke or a stuck damper, that’s usually the sign you need a repair call rather than just a sweep.
Most return visits take between one and three hours, depending on the job. A damper swap or a pilot repair is on the short end; firebox repointing or a rebuild takes longer and may need a second visit to finish. We’ll give you a realistic time window with the written estimate. Call (833) 370-3312 for an exact quote. Estimates are free.
Fireplace repair in Tacony typically ranges from about $175 for a pilot light fix to $2,500 for a HeatShield resurfacing job, with most common repairs in the $200 – $800 range. The final price depends on the firebox, the material, and whether the chimney above needs work too. The written estimate sets the price, and the estimate itself is free. Call (833) 370-3312 for an exact quote.
Yes, we work on Gelco firebox components and Olympia Chimney liners and venting, along with Famco and Copperfield parts. We know where these products wear out and what the correct replacement looks like. HeatShield resurfacing is also available for worn flues and fireboxes that aren’t yet ready for replacement. If your brand isn’t listed, call and we’ll tell you whether we can handle it.
Same-day repair is often possible when you call early. We answer 24/7 at (833) 370-3312, and our fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. When you call, be ready to describe the fireplace type and the symptom.
The warranty comes through the local professional who performed the work, and we’ll explain the coverage in writing with the estimate. We won’t quote a warranty term until you have it in front of you.
Clear the hearth and the area in front of the fireplace, and make sure there’s a path to the mantel and the outside of the chimney. If it’s a gas fireplace, turn the gas off before we arrive if you’re comfortable doing that, and note any smells or sounds you’ve noticed. Have the model info for an insert or gas log set if you have it. Then just leave the rest to us.
Schedule Your Fireplace Repair Service in Tacony Today
Call (833) 370-3312 to book a fireplace repair in Tacony. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a free, no-obligation estimate, a written scope of the work, and a price that’s set per job. If the repair can wait, we’ll tell you. If it shouldn’t, we’ll handle the firebox and the chimney above it in the same visit.
Written by the team at Chimney Sweep Tacony.