Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Liner & Rebuild for Tacony Homeowners
A cracked flue tile, a liner that’s pulled away from the chimney wall, or mortar joints going soft in the crown are the three problems we see most in Tacony‘s older rowhouses and twins. Each one starts small and gets more expensive the longer it sits. We rebuild and reline chimney systems rather than just sweeping them, so a failing flue doesn’t mean juggling a sweep and a mason who won’t talk to each other. Our technicians have up to 13 years of experience with the full system, cap to firebox, and work with professional-grade brands like Gelco and Olympia Chimney. Need a chimney sweep in Tacony? Start with a call, and we’ll tell you whether you’re looking at a $250 cleaning or a larger repair. Call (833) 370-3312. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Liner & Rebuild Service Includes
Every job starts with a camera inspection of the flue so we can show you exactly what we’re working with. From there, the repair fits the problem. Here’s what each piece of the service covers.
Stainless Steel Liner
A stainless steel liner is a rigid or semi-rigid pipe installed inside the existing flue to carry smoke and gases safely up and out. You need one when the original clay tiles are cracked, missing, or never sized correctly for the appliance. We install stainless systems from Olympia Chimney and Copperfield, matched to the flue’s dimensions and the type of fuel you burn.
Flexible Liner
A flexible liner bends to follow offsets and irregular flue paths where a rigid pipe won’t pass. It’s the practical answer for older Tacony chimneys with a jog in the flue or a non-standard shape. We install DuraFlex flexible liner systems for exactly these configurations, and the installation is done with camera verification to confirm the liner is seated correctly end to end.
Liner Replacement
Liner replacement means removing a failed liner and installing a new one in the same flue. It’s the right call when the existing liner is cracked through, has gaps at the joints, or has deteriorated past the point where resurfacing holds. We size the replacement to the appliance and document the old liner’s condition before anything comes out, so you see the reason for the work.
Partial Rebuild
A partial rebuild addresses the upper chimney where the damage is concentrated: the crown, the top courses of brick, and the flue tiles near the cap. You need one when the lower stack is sound but the top is spalling or leaning. We rebuild the affected section, re-crown the top, and leave the healthy masonry below untouched.
Full Chimney Rebuild
A full rebuild takes the chimney down and rebuilds it from the roofline up, replacing deteriorated brick, mortar, and flue tiles as a single structure. It’s warranted when the stack is leaning, the mortar has gone soft through most of its height, or the flue has failed in multiple places. We handle the teardown, the rebuild, and the liner installation as one scope of work.
Liner Repair
Liner repair restores a liner that’s still structurally sound but has isolated defects. HeatShield resurfacing is a professional-grade repair that casts a new smooth surface inside the existing flue, and we use it as a proven option before recommending full replacement. If the liner’s beyond resurfacing, we’ll say so plainly and show you the camera footage.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Liner & Rebuild
We install and work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, all recognized names in the professional chimney trade. That range matters because flue problems don’t come in one shape. A rowhouse flue with an offset calls for DuraFlex, while a straight clay flue that’s still solid often suits HeatShield resurfacing better. Knowing which product fits which flue is the difference between a repair that lasts and one that fails inside a season.
We service Gelco liner systems and know where they wear out, including the joint areas and the connection at the top plate. Olympia Chimney components come up often on Tacony homes where a previous liner was installed to a standard that didn’t match the appliance. Famco and Copperfield caps, crowns, and liner components are part of our regular work too. Whether you have Gelco, Olympia, or any other make, we can help, and we’ll tell you honestly if the existing product can be repaired rather than replaced.
Signs You Need Chimney Liner & Rebuild Right Now
Most liner failures announce themselves before they become dangerous. These are the signs worth acting on.
- Visible cracks or gaps in the flue tiles. A camera inspection shows these clearly, and they let heat and gases reach the chimney’s framing. A cracked tile isn’t a cleaning problem; it’s a liner problem.
- Mortar crumbs or tile fragments in the firebox. When pieces of the flue land in the firebox, the liner above is breaking down. Don’t burn until it’s inspected.
- White staining or crumbling mortar on the exterior stack. This is water getting into the masonry and freezing, which is hard on brick in our climate. Left alone, it moves from the crown down through the whole stack.
- A leaning or visibly shifting chimney. Movement at the roofline usually means the mortar has failed through most of the height. That’s a rebuild conversation, not a patch.
- Smoke rolling back into the room or a strong draft smell. A liner that’s separated or undersized won’t pull properly, and backdraft can push carbon monoxide into living space. Stop using the fireplace and get it checked.
Our Chimney Liner & Rebuild Process – Step by Step
- 1
Camera inspection and photos. We run a camera down the flue and record what we find, then show you the footage on site. You see the cracks, the gaps, and the condition of the crown before we quote anything.
- 2
Written estimate with options. You get a written estimate that lays out repair pathways where more than one exists, including HeatShield resurfacing against full relining when both are viable. The price is set per job by that written estimate.
- 3
Prep and protection. We lay drop cloths, seal off the work area, and protect the roof surface. A rebuild means debris, and we keep it off your floors and out of your rooms.
- 4
Installation or rebuild. Liner installation is sized to the appliance and verified with the camera once seated. Rebuilds go up course by course with new flue tiles set as the stack rises.
- 5
Final inspection and walk-through. We run the camera again, confirm draft, and walk you through the finished work and any photos from the completed install. Nothing gets recommended that isn’t backed by what the camera shows.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Tacony?
Liner and rebuild pricing in Tacony depends on the flue’s size, the liner material, and how much masonry is involved. A typical liner repair with HeatShield resurfacing runs $1,200 – $2,400 depending on flue length and how much of the surface needs casting. A stainless steel or flexible liner installation typically runs $2,500 – $5,500, driven by flue dimensions, the number of offsets, and whether a cap or crown is replaced at the same time. A partial rebuild of the crown and upper courses usually runs $1,800 – $4,000, while a full chimney rebuild from the roofline up runs higher and scales with the height of the stack and the condition of the brick.
What moves these numbers: flue size and shape, the number of offsets, whether the appliance is wood or gas, access to the roof, and whether the crown needs to come off to reach the flue. The written estimate is what sets the final price, and you see the camera evidence behind every line item before you commit. A free estimate includes the inspection, the footage, and a written scope. If the work can safely wait until after burning season, we’ll tell you that too.
Chimney Liner & Rebuild Near Tacony – Our Service Area
We work throughout Tacony and the surrounding neighborhoods, including Holmesburg, Frankford, Mayfair, Oxford Circle, Rhawnhurst, Fox Chase, Torresdale, Olney, Kensington, and Cheltenham Village. Most of these are within a short drive, and the chimney stock across them is similar: older masonry stacks that have taken decades of weather. If you’re just outside this range, call and we’ll confirm coverage. For the full scope of what we do, see Chimney Sweep Tacony. Liner and rebuild work in the region is also covered on our pages for chimney liner & rebuild in South Philadelphia and chimney liner & rebuild in Mayfair.
Serving Tacony, PA – Our Local Coverage Area
We serve Tacony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Liner & Rebuild in Tacony
Chimney liner and rebuild work covers restoring the flue and the masonry structure around it, from resurfacing a sound liner to rebuilding a failed stack. A liner carries smoke and gases up and out; a rebuild restores the chimney’s brickwork, crown, and flue tiles when the structure itself has deteriorated. We handle both as one scope, which matters when a flue problem turns out to involve the crown or the wall around it.
Most liner installations are completed in a day, and HeatShield resurfacing is often done in the same single visit. A partial rebuild typically takes two to three days depending on the weather and how much masonry comes off, and a full rebuild can run a week or more. We give you a realistic schedule in the written estimate, and roofing conditions affect the timeline more than anything else.
Liner repair with HeatShield typically runs $1,200 – $2,400, a new stainless or flexible liner runs $2,500 – $5,500, a partial rebuild runs $1,800 – $4,000, and a full rebuild scales with the stack’s height and damage. The written estimate sets the final price. Call (833) 370-3312 for an exact quote. Estimates are free.
Yes, we service Gelco liner systems, along with DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, and other makes. We’ll inspect the existing system first and tell you whether a repair makes sense or whether the liner has failed past the point of saving. You see the camera footage before we recommend either path.
Same-day appointments are often possible in Tacony when the schedule allows. We answer 24/7 by phone, and we dispatch Sunday through Friday, 7am to 7pm, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 370-3312 and we’ll get you on the schedule.
We stand behind the work we install, and the details are set out in writing with your estimate before any work begins. Materials from Gelco, Olympia Chimney, and the other brands we work with carry their own manufacturer terms. We walk you through both before you sign, so there’s no guesswork about what’s covered.
Clear the fireplace surround and the area in front of it, and make sure we can reach the chimney from the roof or an accessible interior point. Move anything breakable away from the hearth, and secure pets. That’s it. We handle the drop cloths, the camera equipment, and the cleanup, and we’ll walk you through what we find before quoting the repair.
Schedule Your Chimney Liner & Rebuild Service in Tacony Today
If you’re seeing cracks, crumbs in the firebox, or a crown that’s coming apart, the next step is a camera inspection and a free written estimate. We’ll show you what’s there, tell you what can wait, and quote the work as a single scope. Call (833) 370-3312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.