Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
If your chimney is letting water in or your crown is crumbling, call Chimney Sweep Tacony at (833) 370-3312. We handle chimney cap and crown work across Kensington, from a single cap replacement on a Harrowgate rowhouse to a full crown rebuild on an old brick stack shared with the house next door. We know these blocks. The narrow streets, the tight roof access, the party-wall chimneys that run between attached homes: all of it shapes how a cap and crown job actually goes here. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, so you’re not left waiting while water finds its way into old masonry.
Why Kensington Homeowners Call Chimney Sweep Tacony for Chimney Cap & Crown
Kensington’s chimney problems are rarely isolated to one house. Because so much of the housing here is attached 19th-century brick, a failed cap or crown on your stack can push water and creosote trouble into the masonry you share with neighbors. That’s the kind of work we do, and it’s why homeowners on these blocks keep our number.
Our technicians have up to 13 years of experience with aging brick stacks, and we come out expecting to find the layered problems this housing stock produces: mortar joints that have been quietly failing, flue tiles never lined to modern standards, and water that’s been traveling sideways through shared masonry for years before anyone notices the stain. Call (833) 370-3312 and we’ll talk through what you’re seeing before anyone climbs a ladder.
When a sweep turns into a conversation with the adjoining owners about who fixes the crown, we’re comfortable in the middle of it. We serve Kensington and treat a party-wall chimney with the care it needs, because the fix on one side of the wall affects the other.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
We cover the full range of cap and crown work for Kensington’s rowhouses, from a simple cap swap to a rebuilt crown on a shared stack. Here’s what each job involves.
Cap Installation
A properly sized cap keeps rain, birds and squirrels out of the flue, and in Kensington’s tightly packed blocks that matters for more than your own draft. We install caps matched to the flue count and size, using Famco and Copperfield components built for the job. On a multi-flue stack, the cap has to vent every flue correctly, not just cover the opening.

Cap Replacement
When a cap is missing, rusted through or undersized, we replace it before the next hard freeze. In a rowhouse block, a gaping flue next door can pull rain and debris into flues that vent your units too. We size the replacement to the actual flue opening so it does its job through freeze-thaw winters without letting water track down the shared masonry.

Crown Repair
The crown is the concrete top that sheds water away from the stack, and on 100-year-old Kensington brick it’s often cracked and spalling. We repair crowns with proper slope and bond so water runs off instead of soaking in and cycling through freeze-thaw. When a neighbor’s cracked crown is pushing water into your ceiling, our chimney cap & crown team can diagnose where it’s actually entering.

Crown Coating
If the crown is sound but showing surface wear, a professional coating can seal it and buy years before a full repair. We use HeatShield resurfacing materials where they fit, and we’ll tell you plainly when coating will hold and when a crown is too far gone to coat honestly. Nothing gets recommended without photo evidence you can see yourself.
Trusted Brands We Service in Kensington
We work with recognized professional-grade brands because a cap or crown is only as good as the materials holding it together. For Kensington’s rowhouse chimneys we install and service Famco and Copperfield caps and components, and we use Gelco and Olympia Chimney products where the job calls for them. We don’t overstate what’s on hand; we specify what fits your flue and your stack and get it in. Whether you need a single-flue cap on a narrow party-wall chimney or a multi-flue cap sized for a subdivided rental, the material choice is matched to the actual opening, not a one-size guess.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Kensington Homes
- Cracked mortar crowns on old brick stacks. Freeze-thaw winters work water into cracks that have been there for decades, and the damage doesn’t stop at your roofline. On attached rowhouses it spreads through the shared masonry to the bricks on either side.
- Missing or undersized caps on shared flues. Rain and animals get into flues that serve more than one unit, which leads to creosote buildup and draft problems across the block. A cap that’s too small doesn’t seal the opening, so it might as well be missing.
- Improperly sealed flashing around party-wall chimneys. Poor flashing lets water track sideways into neighboring ceilings and walls, and the stain usually shows up somewhere far from the actual leak. Finding it takes a proper inspection, not a guess from the ground.
- Unlined or old clay-tile flues serving coal-conversion fireplaces. Many Kensington rowhouses still run vintage heating equipment and old fireplaces through flues that were never lined to current standards. Combined with the coal-era residue in some stacks, that’s a real fire risk worth checking before another heating season.
Pricing for Chimney Cap & Crown in Kensington, PA
A typical single-flue cap installation in Kensington runs $180 – $340, and a multi-flue cap for a rowhouse stack usually lands between $350 – $750 depending on flue count and access. Crown repair generally runs $400 – $900, while a full crown rebuild on a badly cracked 100-year-old stack can reach $1,200 – $2,500. Crown coating is the lighter option, typically $300 – $650. Tight roof access on narrow blocks, the number of flues, and how much shared masonry is affected all move the number. The written estimate sets the final price, and the estimate itself is free. Call (833) 370-3312 for an exact quote.
We Also Serve Cities Near Kensington
Kensington sits alongside blocks with the same old rowhouse construction, and we work those too. If you’re nearby, we cover Port Richmond, Frankford, Olney and Tacony for the same cap and crown work, with the same attention to party-wall chimneys and shared stacks. Call (833) 370-3312 to book a sweep or a repair in any of them.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
Yes, it can. In Kensington’s attached rowhouses, a missing cap on one home sends water into the shared masonry, and it often shows up as damp staining on a neighbor’s ceiling two doors away. Water travels sideways through the party wall, so the leak rarely stays contained to a single owner. If you’re seeing a stain and your own cap looks fine, call (833) 370-3312 and we’ll inspect the shared stack.
A sound crown with surface wear can usually be coated, while a crown with real cracks and spalling needs repair. We make that call by getting up there and looking, then showing you the photos before recommending anything. Coating a failing crown just traps the problem; repairing a crown that only needed coating wastes your money. Call (833) 370-3312 and we’ll tell you which one you’re looking at.
A multi-flue cap is a single cap covering several flues in one stack, and it’s common here because many Kensington rowhouses run multiple flues through one party-wall chimney. It seals every opening at once and vents them correctly, which matters when units share a stack. Sizing it to the actual flue count is the whole job. Call (833) 370-3312 for a look at yours.
It can. A compromised crown and shared stack let a neighbor’s appliance vent into the flue that serves your unit, which means exhaust and draft problems cross between attached homes. That’s the cross-contamination risk dense housing creates, and it’s a good reason to fix a crown before it fails further. Call (833) 370-3312 to have the shared stack inspected.
Professional contractors here typically use Famco, Copperfield, Gelco and Olympia Chimney components, matched to the flue size and stack. We install and service all of them, and we specify based on your actual opening rather than a generic fit. Whatever the material, the cap has to vent the flue it covers. Call (833) 370-3312 for a free estimate on yours.
If your cap is missing or your crown is cracking, don’t wait for the next freeze-thaw to make it worse. Call (833) 370-3312 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. From a single cap to a rebuilt crown on a shared Kensington stack, one specialist, one call.
Written by the team at Chimney Sweep Tacony.