Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Tacony?
Chimney cap installation in Tacony typically costs $250 to $600, and a new chimney crown usually runs $450 to $1,300, so most cap-and-crown jobs land somewhere between $400 and $1,600 depending on the damage and the materials. A small crown patch on a single flue is often at the low end, while a full crown rebuild on a wide multi-flue chimney sits at the top. We give you a written estimate before any work starts, and the price on that estimate is the price you pay.
Two parts of the chimney take the worst of the weather, and they’re both at the very top. The cap keeps water, birds and debris out of the flue. The crown is the concrete slab that sheds water away from the masonry below it. When either one fails, water works its way into the brick and mortar, and what started as a cheap fix turns into a rebuild. Our technicians have up to 13 years of experience reading exactly this kind of damage, and we’d rather tell you the honest number now than watch a small problem grow.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what the work typically runs in the Tacony market this year. These are estimated ranges for the job, materials included, and every job gets its own written estimate because no two chimneys are the same.
| Line item | Typical estimated range |
|---|---|
| Single-flue cap, standard galvanized or stainless steel | $150 – $400 |
| Multi-flue cap or custom-sized cap | $350 – $800 |
| Copper cap (lifetime material, custom fabricated) | $500 – $1,200 |
| Crown wash or resurfacing (light cracking, no structural damage) | $300 – $600 |
| Full crown rebuild, standard single-flue chimney | $600 – $1,100 |
| Full crown rebuild, wide or multi-flue chimney | $900 – $1,600 |
| Cap and crown done together | $400 – $1,600 |
| Crown repair plus repointing of upper courses | $700 – $1,500 |
What pushes a job up? The size and shape of the crown matters most. A wide crown over three flues needs more concrete, more forming, and more time than a narrow one over a single flue. Access counts too: a chimney on a steep roof or one boxed in by a tight roofline takes longer to work around safely than one you can reach easily. Cap material moves the number as well. Galvanized is the budget choice, stainless steel holds up far longer against weather, and copper is a premium material that some homeowners choose for looks as much as durability. Damage found underneath the crown is the wildcard. If the top courses of brick have gone soft from years of water getting in, repointing or rebuilding those courses gets added to the job, and that’s when you see the higher end of the range.
What keeps it low? Catching the problem early. A crown with a few hairline cracks can often be sealed and resurfaced for a fraction of a rebuild. That’s the whole reason we diagnose before we quote, and why a routine inspection is worth the call.
What Affects Chimney Cap & Crown Pricing in Tacony
Tacony is full of rowhouses and older masonry chimneys, and that shapes the pricing in ways a suburban market wouldn’t. Here are the factors we weigh on every estimate.
- Chimney style and age of the masonry. Many Tacony homes have solid brick chimneys that have been through a lot of freeze-thaw cycles. Older brick that’s gone porous takes more prep and repair before a new crown can go on, and that prep is part of the estimate.
- Number of flues. A single-flue chimney means a smaller crown and a simpler cap. Multi-flue chimneys need a wider, heavier crown and a larger custom cap, which is where the price climbs.
- Cap material. Galvanized steel, stainless steel and copper all carry different price tags and different lifespans. Stainless and copper cost more up front and last longer, and the cap is the one part of the chimney that takes the full brunt of rain, snow and wind.
- Roof pitch and access. A steep roof, a chimney set close to a neighboring roofline, or a tight alley access point all mean slower, more careful work. That’s a labor factor, and it’s real.
- Hidden damage under the crown. Water that’s been getting in for years can soften the top courses of brick. If we find that, the estimate grows to cover repointing or rebuilding those courses, and we’ll show you what we found before we do it.
- Whether you bundle the work. If the cap and crown both need attention, handling them in one visit usually costs less than two separate trips. It’s the same trip up the roof and the same setup.
The freeze-thaw cycle is the quiet troublemaker in this part of Philadelphia. Water gets into a hairline crack in the crown, freezes overnight, expands, and widens the crack a little more each winter. By the time a homeowner notices a damp patch on the ceiling or crumbling mortar at the top, the damage has been working for a while. A cap and a sound crown are what break that cycle. If you’re seeing early signs, our chimney cap & crown service page walks through what we check and how we fix it.
How to Save on Chimney Cap & Crown
There’s no coupon needed here. The savings come from catching problems while they’re small and from knowing what you’re actually paying for.
- Fix the crown before it fails completely. Resurfacing a crown with minor cracking costs a fraction of a full rebuild. Once the crown crumbles away and water reaches the brick, you’re paying for masonry work on top of the crown.
- Get the cap at the same time. If you’re already having the crown repaired, adding the cap is a small marginal cost compared with a separate visit later. The cap protects the crown and the flue from the same weather that caused the problem.
- Choose the right cap material for your situation. Stainless steel and copper cost more than galvanized, but they last longer and hold up better to the elements. A cheaper cap that rusts out in a few years isn’t a saving.
- Ask for the estimate in writing and read the scope. A clear written estimate tells you exactly what’s included: cap, crown, any repointing, cleanup. You shouldn’t have to guess what the number covers.
- Don’t wait for a leak. The most expensive cap-and-crown job is the one done after water has already gotten into the house. An annual inspection catches a failing crown before it lets water in.
We offer free estimates, so it costs nothing to find out what your chimney actually needs. Call (833) 370-3312 and we’ll get you a written number. We answer 24/7.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Tacony?
A chimney cap in Tacony typically costs $150 to $600, with most single-flue standard steel caps landing around $250 to $400 and custom or copper caps running higher. The final number depends on flue count, size and material. Call (833) 370-3312 for an exact quote. Estimates are free.
Is it cheaper to repair a chimney crown or rebuild it?
Repairing a crown is almost always cheaper than rebuilding it: resurfacing a cracked crown typically runs $300 to $600, while a full rebuild runs $600 to $1,600. Repair makes sense when the damage is surface-level cracking; a rebuild is the right call when the crown has broken apart or the brick underneath has gone soft. We diagnose the actual condition before recommending either, and call (833) 370-3312 to get that diagnosis started.
How do I know if my chimney crown needs repair?
Look for visible cracks, crumbling concrete, or water staining on the chimney’s exterior and interior. A crown that’s cracked or pulling away from the flue lets water in, and that water is what causes the expensive damage. If you’re not sure, an inspection settles it. Call (833) 370-3312 and we’ll tell you what we find.
Can you install a chimney cap and repair the crown in one visit?
In most cases, yes. Cap and crown work is done from the same access point, so handling both together on one visit is standard for us. Bundling the two usually costs less than scheduling separate visits, and it gets the chimney sealed against weather in a single trip. Call (833) 370-3312 to book an estimate. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do I need a permit for chimney cap and crown work in Tacony?
It varies by scope. A cap installation or a crown resurface usually doesn’t require a permit, while structural rebuilding or masonry work may, depending on your municipality. We’ll flag it during the estimate so you know what to expect, and you can confirm the specifics with Philadelphia’s building department. Call (833) 370-3312 with questions about your project.
Why Choose Chimney Sweep Tacony for Cap and Crown Work
A cap and crown job looks simple until you’re on the roof. The crown has to shed water away from the flue, the cap has to fit precisely, and the materials have to survive every season this climate throws at them. That’s why we work with professional-grade brands like Famco and Copperfield for caps and components, and why our scope covers the whole chimney rather than just the top of it. If the inspection turns up a failing liner underneath, we can install a DuraFlex flexible liner, or resurface with HeatShield before jumping to full replacement. That’s the advantage of a specialist: cap, crown, liner and firebox all get looked at by the same set of trained eyes.
Our technicians have up to 13 years of experience, and we approach every job the same way: diagnose the system, explain what we found, give you a written price, and let you decide. If you’re a Tacony homeowner with a cracked crown, a missing cap, or a chimney you haven’t had looked at in years, give us a call.
Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Tacony market as of 2026. Chimney Sweep Tacony offers free estimates – call (833) 370-3312.
Written by the team at Chimney Sweep Tacony.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ryan Fletcher"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Whitney Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Holly Delaney