Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Cheltenham Village?
A standard chimney sweep in Cheltenham Village typically runs $150 to $290, and most homes fall in the middle of that range. If the technician finds creosote buildup heavy enough to need chemical treatment, or if the flue has a stubborn obstruction, expect closer to $250 to $450. The written estimate you get before any work begins sets the final price, and there’s no charge for that estimate.
Cheltenham Village sits in that band of older, tightly built housing stock where a lot of chimneys were originally lined for coal and later converted to wood or gas. That history matters for pricing. A 1920s brick flue that’s been burning wood for decades tells a different story than a modern insert, and the sweep cost reflects what’s actually inside the flue, not just the address. We encourage you to call our team to schedule a free inspection before you commit to any number.
Key Takeaways
- Standard sweep: $150 to $290 for most Cheltenham Village homes.
- Heavy creosote or obstruction removal: $250 to $450.
- Cap and crown work, liner repair, and firebox issues are quoted separately.
- Estimates are free. Call (833) 370-3312. We answer 24/7.
- Our technicians have up to 13 years of experience with full-scope chimney systems.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the numbers shake out for Cheltenham Village in 2026. Use these as planning figures, not quotes. Every chimney is different, and the only number that matters is the one written on your estimate.
| Service | Typical Range | What’s Included |
|---|---|---|
| Standard chimney sweep (wood-burning) | $150 – $290 | Full flue brush, firebox clean, damper check, basic visual inspection |
| Gas fireplace / insert sweep | $130 – $220 | Flue vacuum, venting check, cap and termination inspection |
| Heavy creosote treatment (Stage 3) | $250 – $450 | Chemical sweep, extended brush work, disposal |
| Obstruction removal (nest, debris) | $200 – $400 | Rotor or manual removal, flue video check |
| Chimney cap installation | $180 – $420 | Stainless multi-flue or single-flue cap, sealant, mounting |
| Crown repair or rebuild | $350 – $1,100 | Crack filling, resealing, or full crown replacement with mortar |
| HeatShield liner resurfacing | $1,200 – $2,600 | Liner cleaning, HeatShield application, curing, inspection |
| DuraFlex flexible liner install | $1,800 – $4,200 | Flexible stainless liner, insulation, top plate, termination |
| Firebox repair (repointing, panels) | $400 – $1,400 | Mortar repair, firebrick replacement, smoke chamber work |
What drives cost up or down comes down to a handful of realities. Height of the chimney matters, since a 30-foot stack takes more time and more brush extensions than a short one. Accessibility matters more than people realize. A chimney you can walk right up to on a flat roofline is faster to work than one wrapped in steep slate behind a low gutter. And the big one is condition. A flue that’s been swept annually in a Cheltenham Village home costs the low end of the range. A flue that hasn’t been touched since the previous owners last burned wood may need several passes, chemical treatment, and a video scope to confirm it’s clean.
We quote line items separately because it’s the honest way to do it. If the sweep goes smoothly and the creosote is light, you pay for the sweep. If we find a cracked crown while we’re up there, we tell you what the repair costs and let you decide. No surprise numbers on the invoice.
What Affects Chimney Cleaning Pricing in Cheltenham Village
- Chimney age and construction. Many Cheltenham Village homes were built in the early-to-mid twentieth century, and their chimneys were designed for coal heat. Coal flues are often larger and more irregular inside than modern wood flues, which means more brushing time and sometimes a video scope to make sure the entire run is clear. Older mortar joints that have softened can also slow down the sweep so nothing gets knocked loose in the process.
- Creosote grade. The National Fire Protection Association grades creosote from Stage 1 (light soot) to Stage 3 (glazed, hardened tar). Stage 1 is quick. Stage 3 can require chemical sweeping agents and multiple passes, which is where the price jumps toward $450.
- Flue configuration. Straight runs sweep fast. A flue with an offset, a transition from one liner type to another, or a clay tile liner that’s deteriorated is slower work. That’s also when we’d consider something like a DuraFlex flexible liner as a long-term fix, since it can handle older or non-standard flue shapes where a rigid liner won’t fit.
- Whether the fireplace is wood, gas, or pellet. Gas inserts are generally cheaper to service because there’s no soot or creosote in the traditional sense. Wood-burning fireplaces produce creosote and need real brush work. Pellet appliances sit somewhere between, but they tend to clog venting more often.
- Roof pitch and access. A steep pitch or a chimney crowded by surrounding rooflines means slower, more careful work. So does a chimney with a full-width crown that needs to be walked on for the sweep to reach the top.
- Bundled services. If a sweep and cap installation happen on the same visit, we can generally do the work more efficiently than scheduling two separate trips. That shows up on the estimate.
One more factor that’s specific to Cheltenham Village: the older housing stock often has chimneys that were shared between adjacent fireplaces or even adjacent units. That means servicing one flue sometimes means checking a neighbor flue for cross-contamination, which is a step we won’t skip. It’s not a pricing trick. It’s a safety reality that comes with this kind of architecture.
How to Save on Chimney Cleaning
There’s no secret trick to lowering the price. The savings come from doing a few things right and catching problems early.
- Sweep annually. This sounds counterintuitive, but the cheapest sweep is a regular one. A yearly sweep keeps creosote from reaching Stage 3, and Stage 3 is where the cost really climbs. Skipping a couple of years to “save” $200 usually means paying for chemical treatment and extra labor later.
- Burn properly seasoned wood. Wood with more than 20% moisture content creates more creosote per cord. Season your wood for a full year before burning. It’s a small habit with a real effect on how often you need heavy treatment.
- Get a video scope in the estimate. A camera inspection catches a cracked liner or a hairline crown fracture before it turns into a full rebuild. The scope itself is quick, and we include inspection findings with the estimate at no extra charge.
- Bundle cap and crown work with the sweep. If the cap is missing or the crown has a crack, doing both on the same visit is more efficient than scheduling separate calls.
- Ask about HeatShield before full relining. This is the biggest single saving available on a failing liner. HeatShield is a professional-grade liner resurfacing system that can restore a deteriorated clay flue from the inside without a full liner replacement. It’s not right for every situation, but when it is, it can save a homeowner a significant amount over a full rebuild. We always evaluate HeatShield before recommending replacement.
- Schedule in the off-season if possible. Fall is peak season for sweeps. Late spring and summer tend to have more availability and easier scheduling.
We offer free estimates, so there’s no cost to finding out what your chimney needs. Call (833) 370-3312. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Does the Free Estimate Cover?
The free estimate includes a visual inspection of the firebox, damper, smoke chamber, flue, cap, and crown. We check for creosote grade, obstruction, and visible liner damage. If anything looks questionable, we tell you what the repair would cost. There’s no charge for the estimate and no obligation to book work.
If you want a video scope inside the flue to confirm liner condition, that’s part of the estimate process. A camera shows us what a visual check from the top and bottom can miss, especially in older Cheltenham Village homes where a clay liner may have hairline cracks that aren’t obvious from the smoke chamber. Knowing this before the sweep starts means the estimate you get is accurate, not a guess that changes once the brush goes down.
Chimney Repair Costs Beyond the Sweep
The sweep itself is usually the smallest line item. The bigger costs come when the sweep reveals a structural problem, and those are worth understanding before you’re in the middle of it.
Caps and crowns. A missing chimney cap lets rain, birds, and debris into the flue. A cracked crown lets water into the masonry below and slowly destroys the chimney from the inside out. Cap installation runs $180 to $420. Crown repair runs $350 for a crack fill and reseal, up to $1,100 for a full crown rebuild with new mortar. These are among the most cost-effective preventive repairs a homeowner can do, and we use Famco and Copperfield components because they hold up in the freeze-thaw cycles this region gets.
Liner repair and resurfacing. A lining failure is where a chimney can go from a routine service to a major repair. A cracked or deteriorated clay tile liner allows heat and combustion gases to reach surrounding framing, which is a genuine fire risk. HeatShield resurfacing runs $1,200 to $2,600 and restores the liner from the inside. A full DuraFlex flexible liner installation runs $1,800 to $4,200, and it’s the right call when the existing flue is too damaged or irregular for resurfacing. Both are professional-grade installations, and both are done by our technicians who work with these systems directly.
Firebox and smoke chamber repair. Deteriorating firebrick, missing mortar joints, and damaged smoke chamber parging are common in older Cheltenham Village fireplaces. Repairs run $400 to $1,400. We handle this work as part of the same job because a chimney is one system. The flue, the smoke chamber, the damper, the firebox, and the crown all affect each other. A general handyman can repoint brick, but detecting how a firebox repair affects draft requires knowing the whole system.
Does Chimney Cleaning Cost More for a Dirty Chimney?
Yes. A chimney with heavy creosote buildup or a serious obstruction costs more to clean than one that’s been maintained. The standard sweep range of $150 to $290 applies to a chimney with light to moderate buildup. Once creosote reaches Stage 3 (glazed and hardened), the technician has to use chemical sweeping agents and multiple brush passes to remove it without damaging the clay tile liner. That pushes the job to $250 to $450, and in some cases higher if the flue needs a full chemical treatment over multiple visits.
Obstructions are their own category. A bird nest, a collapsed tile, or a debris blockage needs physical removal before any sweeping begins. Depending on how far down the flue the obstruction sits and what it’s made of, removal runs $200 to $400. It’s worth knowing that a blocked flue is a serious safety issue. If you suspect a blockage, don’t light a fire until it’s been checked. Call (833) 370-3312. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Is a Chimney Cleaning Worth the Cost?
Yes. The $150 to $290 cost of a routine sweep is small compared to what a chimney fire or a liner failure costs to repair. Annual sweeping removes the creosote that fuels chimney fires, and an annual inspection catches crown cracks, liner damage, and cap failures while they’re still inexpensive to fix.
There’s also the practical matter of insurance. Many homeowner policies expect a chimney to be maintained, and a documented annual sweep helps if you ever need to file a claim for a chimney-related loss. The sweep is a maintenance cost, not a repair cost, and it’s the one that keeps the bigger repairs away.
For homeowners with wood-burning fireplaces in Cheltenham Village, the recommendation is annual. For gas fireplaces, every two to three years is usually sufficient, since gas appliances don’t produce creosote. Either way, having someone look at the cap and crown once a year is worth the visit.
Can You Clean a Chimney the Same Day?
Often, yes. Same-day chimney cleaning is available depending on the schedule, and the free estimate can usually happen on the same visit as the sweep. Dispatch runs Sunday through Friday, 7am to 7pm. If you call and the schedule is open, we can often get someone out that day. Call (833) 370-3312. We answer 24/7.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Cheltenham Village?
Chimney cleaning in Cheltenham Village costs $150 to $290 for a standard sweep. Heavy creosote treatment runs $250 to $450, and obstruction removal runs $200 to $400. Call (833) 370-3312 for a free estimate and a firm price for your chimney.
How often should a chimney be cleaned?
Once a year for wood-burning fireplaces, and every two to three years for gas appliances. The annual sweep keeps creosote from reaching the grade that requires chemical treatment, which roughly doubles the cost of the cleaning. Call (833) 370-3312 to schedule the next visit.
Is it cheaper to repair or replace a chimney liner?
HeatShield resurfacing at $1,200 to $2,600 is cheaper than a full DuraFlex liner replacement at $1,800 to $4,200, and it works when the existing flue is intact enough to hold the resurfacing material. A full replacement is necessary when the flue is too damaged or irregular for resurfacing. The estimate tells you which applies. Call (833) 370-3312 to find out.
Do you charge extra for a chimney that hasn’t been swept in years?
Not automatically, but the grade of creosote usually means more work. A neglected flue often lands in the $250 to $450 treatment range instead of the standard sweep range. There’s no separate surcharge for neglect, just the actual labor that the cleaning requires. Call (833) 370-3312 for an estimate.
What’s included in the price of a chimney cleaning?
A standard sweep at $150 to $290 includes flue brushing, a firebox clean, a damper check, and a visual inspection of the cap, crown, and firebox. Repairs found during the inspection are quoted separately before any work begins. Call (833) 370-3312 to book.
Contact Us for a Free Chimney Cleaning Estimate in Cheltenham Village
If you want to know exactly what your chimney needs before you commit to a number, we’ll come out and take a look at no charge. We work on the full system, from the cap and crown down to the firebox, and we use professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 13 years of experience with these systems, and we diagnose the chimney before we clean it, which is why our estimates hold. Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Cheltenham Village market as of 2026. Chimney Sweep Tacony offers free estimates – call (833) 370-3312.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ryan Fletcher"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Whitney Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Holly Delaney