Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Kensington
Kensington rowhouses were built tight, and their chimneys were built tighter. If your liner is failing, your crown is cracked, or your stack needs a partial rebuild, the work has to account for neighbors sharing the same masonry mass. We work in Kensington regularly and know what that means for access, inspection, and sequencing. Call (833) 370-3312 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Kensington Homeowners Call Chimney Sweep Tacony for Chimney Liner & Rebuild
Most of the liner and rebuild calls we get in Kensington start with a simple sweep request and turn into something bigger by the time a camera goes down the flue. That’s normal here. The rowhouse blocks along the blocks feeding Kensington Avenue and the side streets off Allegheny are packed with stacks that have never had a proper stainless liner, and once they’re opened up, the real condition shows.
Our technicians have up to 13 years of experience working party-wall chimneys in Kensington and the surrounding neighborhoods. We diagnose the whole system, not just the flue. That means the crown, the smoke chamber, the firebox, and what the neighbors on either side are dealing with. If a HeatShield resurfacing will buy your existing flue another stretch, we’ll say so before recommending a full reline. If a partial rebuild is the honest answer, we’ll show you the photos from the inspection so you can see what we’re seeing.
Kensington customers call us for liner replacement, flexible liner installs, and partial rebuilds, and they call because we explain what’s actually happening on their specific stack instead of handing them a generic report. The estimate is free, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Kensington
Stainless Steel Liner in Kensington
Stainless steel liner is the standard fix for the unlined clay flues common in Kensington’s textile-era rowhouses. When the clay tile is spalled or the joints have opened up, a properly sized stainless liner gives the appliance a continuous, sealed flue path and isolates it from the shared masonry. We work with chimney liner & rebuild materials from names like Gelco and Olympia Chimney, sized to the appliance rather than guessed.
Flexible Liner in Kensington
Flexible liner installs are the go-to on the narrow, offset stacks that fill Kensington’s attached blocks. Rigid liner won’t navigate the bends and the cramped footprint of these party-wall chimneys without tearing out masonry you’d rather keep. We install DuraFlex flexible liner systems for exactly this reason: they follow the flue, seal the path, and let a qualified technician finish the job on a roof with almost no staging room. If your flue has a jog above the damper, flexible is usually the right call.
Liner Replacement in Kensington
Liner replacement is the answer when the existing liner has failed outright, when there’s glazed third-degree creosote baked onto coal-era residue, or when the flue serving the fireplace was never lined to modern standards in the first place. A brush won’t remove that glazed layer, and no amount of sweeping will fix it. In Kensington, replacement also means checking that the new liner isn’t being installed into a stack that’s still leaking from a neighbor’s crown failure two doors down. We coordinate on that before we install.
Partial Rebuild in Kensington
Partial rebuild covers the top of the stack when the brick and crown above the roofline have spalled or the mortar joints have gone soft. On a shared party-wall chimney, that means rebuilding only the affected section without disturbing the neighbor’s flue tile next to it. We handle crown rebuilds, cap installation, and repointing at the top of the stack. The freeze-thaw winters in this part of Philadelphia work on these soft old bricks every year, so catching the failure early is what keeps a partial rebuild partial.
Trusted Brands We Service in Kensington
We install and work with professional-grade brands the chimney trade recognizes: DuraFlex for flexible liner systems, HeatShield for liner resurfacing, Gelco and Olympia Chimney for stainless components, and Famco and Copperfield for caps and related parts. That matters in Kensington because the right part for a 130-year-old party-wall flue isn’t always the one a generalist would reach for. Where a repair can be done with HeatShield resurfacing instead of a full reline, we explore it first. Fast turnaround on the materials we need to finish the job right.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Kensington Homes
- Unlined clay flues in shared party-wall stacks: Most of Kensington’s 19th-century worker rowhouses were built with clay tile that was never lined to modern standards. When one owner’s crown cracks or their cap goes missing, water gets into the shared masonry and spalls brick on both sides of the wall.
- Cross-contamination between adjoining flues: On a shared stack, a neighbor’s appliance can vent smoke and creosote through failed mortar joints and loosened flue tile into your flue. That’s a real problem on the attached blocks around Kensington, and it can’t be fixed by sweeping your side alone.
- Third-degree creosote on coal-era residue: Flues that saw intermittent heating-season use over decades build up glazed, tar-like creosote that a brush won’t touch. When you see shiny tar inside the firebox throat, that’s a signal for liner replacement, not a sweep.
- Spalled crowns and missing caps: The humid summers and freeze-thaw winters here cycle moisture through soft old brick and mortar crowns. A missing cap on one rowhouse lets water track into shared masonry and shows up as damp staining two doors away, which usually means a conversation with the adjoining owners about who fixes the crown.
Pricing for Chimney Liner & Rebuild in Kensington, PA
Kensington liner and rebuild pricing reflects the work party-wall chimneys actually require. A typical stainless steel liner for a rowhouse flue in Kensington runs $2,200 to $4,500 depending on liner length, flue configuration, and whether the crown or smoke chamber needs rebuilding at the same time. Flexible liner installs for offset stacks usually land in the same $2,200 to $4,500 range. HeatShield resurfacing, where it’s a viable alternative to a full reline, typically runs $1,200 to $2,800. A partial rebuild of the crown and top of stack runs $1,500 to $4,000 based on how much brick has spalled. The written estimate sets the final price, and the estimate is free. Call (833) 370-3312 to schedule one.
We Also Serve Cities Near Kensington
We serve Kensington and the surrounding neighborhoods, including Port Richmond, Frankford, Olney, and Tacony. If you’re just over the line in any of those, the party-wall chimney realities are similar and the work is the same. You can also reach our main Kensington service hub for more on how we work in the neighborhood.
Serving Kensington, PA – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Kensington
Not always, but you likely need a conversation about sequencing. A shared party-wall stack means one owner’s failed crown or missing cap can push water into the shared masonry and affect the neighbor’s flue, so coordinating the work usually saves both sides money and trouble. Call (833) 370-3312 and we’ll walk through what the inspection shows on each side.
The only reliable way to tell is a camera inspection. Many Kensington rowhouses were built with clay tile but it’s often spalled, misaligned, or has loosened joints that a visual check from the firebox can’t reveal. We run a camera down the flue and show you the photos so you can see the condition yourself. Call (833) 370-3312 to book a sweep and inspection.
It means the liner decision has to account for moisture coming in from outside, not just what’s happening inside the flue. Spalling brick on a shared stack usually traces to a failed crown or missing cap somewhere on the stack, and installing a liner into a leaking stack just traps the problem behind it. We rebuild the crown and cap first or in the same visit so the new liner goes into a dry stack. Call (833) 370-3312 for a free estimate.
No. Glazed, tar-like creosote that shines inside the firebox throat is third-degree creosote, and a brush won’t remove it. That condition signals liner replacement or HeatShield resurfacing rather than a sweep, because continued burning on top of that buildup is a real chimney fire risk. Call (833) 370-3312 and we’ll inspect and give you the honest answer.
Yes. Tight roofs and narrow alleys are normal work in Kensington, and the flexible liner systems we install are sized for exactly these cramped party-wall stacks. Rigid liner often won’t fit the offset flues here, which is why DuraFlex flexible liner is the standard solution on these blocks. Call (833) 370-3312 to schedule an inspection and estimate.
Written by the team at Chimney Sweep Tacony.