Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Bustleton
If your fireplace smokes into the room, your insert won’t draw, or you’ve been told your Bustleton chimney needs a full rebuild, we can help. Chimney Sweep Tacony handles chimney liner & rebuild work across Bustleton, from properly sized stainless liners to partial and full chimney rebuilds on the neighborhood’s stone and brick single-family homes. We know this part of Far Northeast Philadelphia well, and we know what post-war chimneys here tend to need. Call (833) 370-3312 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Bustleton Homeowners Call Chimney Sweep Tacony for Chimney Liner & Rebuild
Bustleton homeowners call us because we diagnose the whole system, not just the flue. Many of the houses here are 1950s-70s stone or brick veneer builds with masonry chimneys that were never lined for the appliances now venting into them. We put a camera down the flue and show you what we see before recommending anything, so you’re never asked to approve a rebuild on faith.
Our technicians have up to 13 years of experience with liner and rebuild work, and they handle the full chimney from cap and crown down to the firebox. That matters in Bustleton, where a single job often crosses from flue to firebox and back, and nobody wants to line up a second contractor for the fireplace end of it.
When you call, we book a sweep and assessment and work to get out to Bustleton quickly during the season. If a call comes outside dispatch hours, we answer 24/7 and book it into the next opening, Sunday through Friday, 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Bustleton
From annual sweep to full liner rebuild, it’s one specialist, one call. Here’s what Bustleton homeowners most often need.
Stainless Steel Liner
A correctly sized stainless steel liner is the standard fix for an oversized or unlined flue in a Bustleton home. We size the liner to the appliance actually venting into the stack, not to the old open fireplace the flue was built for, so draft improves and smoke rollback stops. We install DuraFlex flexible systems where the flue path is irregular, and rigid stainless where the run allows it.
Flexible Liner
Older Bustleton chimneys often have offset flues, tight turns, or a liner path that won’t take a rigid pipe. A flexible liner lets us reline that flue without opening up the masonry. It’s the same professional-grade stainless, just built to follow the existing chimney instead of fighting it.
Liner Replacement
When the original clay tiles are cracked, the joints have opened, or a previous liner has failed, replacement is the answer. We pull the old liner, clean and inspect the flue by camera, and install a new stainless system sized for your appliance. Where the masonry is sound and only the inner surface has degraded, HeatShield resurfacing can be a repair pathway that avoids a full replacement.
Partial Rebuild
When the chimney above the roofline has spalled faces, open mortar joints, or a cracked crown but the lower stack is sound, a partial rebuild restores what’s failed. We rebuild the affected section, pour a new crown, and fit a proper cap to keep freeze-thaw water out. In Bustleton’s winters, that cap and crown are what protect the rest of the stack from the next round of damage.
If the masonry itself has failed top to bottom, a full rebuild is on the table, and we’ll walk you through it honestly. See our full Chimney Liner & Rebuild services for the complete scope, including cap and crown work and fireplace repair.
Trusted Brands We Service in Bustleton
We install and work with professional-grade brands: DuraFlex flexible liner systems, HeatShield resurfacing, Olympia Chimney, Gelco, Famco, and Copperfield components. These are the names professional chimney contractors use nationwide, and they’re the materials we specify in Bustleton because they hold up to the freeze-thaw cycles this area sees every winter. We don’t claim to stock parts locally. What we do is bring the right material to your job and turn the work around quickly once the assessment is done.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Liner & Rebuild Problems We See in Bustleton Homes
Bustleton’s post-war clay-tile flues were sized for open fireplaces. When a mid-century insert or wood stove was later dropped into the same stack, the flue is often far larger than the appliance needs, and it drafts sluggishly until a correctly sized stainless liner goes in. That oversize-flue-plus-insert pattern is a signature of the Far Northeast’s post-war build-out, not something you run into in newer construction or the older rowhouse stock closer to the river.
In a typical Bustleton call, a homeowner with a 1950s-70s stone or brick veneer house says the fireplace smokes into the room or the insert won’t draw. A technician finds an original clay-tile flue with no liner at all, or one whose tiles are cracked and whose joints have opened after decades of freeze-thaw. The usual cause is an oversized, unlined, or damaged flue paired with a retrofit appliance it was never designed for. The standard remedy is a camera-documented assessment, then a properly sized stainless liner or, where the masonry has failed, a partial or full rebuild with a new crown and cap. If creosote has built up to a glazed third-degree stage, the flue is cleaned and evaluated before any relining, because a brush alone won’t clear a tar glaze.
- Unlined or cracked clay-tile flues. In 1950s-70s Bustleton homes these often get treated as fine until a camera shows open mortar joints and tile gaps letting heat and gases reach the surrounding masonry.
- Insert retrofits in oversized flues. Wood stoves and inserts vented into a flue built for an open fireplace draft poorly, causing smoke rollback and sluggish starts that get misdiagnosed as a damper or firebox problem.
- Spalling crowns and cracked caps. Water gets into the stack through freeze-thaw, and mortar joints and brick faces degrade through Bustleton winters until a rebuild is the only option left.
- Glazed third-degree creosote. A tar-glazed flue can’t just be brushed, and it has to be addressed before any liner goes in.
Pricing for Chimney Liner & Rebuild in Bustleton, PA
Nothing is recommended here without camera evidence you can see for yourself. A typical stainless steel liner for a Bustleton home runs roughly $2,000 – $4,500 depending on flue length, appliance size, and whether the flue needs cleaning or repair first. Liner replacement commonly lands in that same range. A partial rebuild above the roofline is typically $2,500 – $6,000 for the affected section with a new crown and cap, and a full chimney rebuild runs higher because it involves the entire stack from firebox to top. HeatShield resurfacing, where it’s a fit, can cost less than full relining. Your written estimate sets the final price, and the estimate is free. Call (833) 370-3312 for an exact quote.
We Also Serve Cities Near Bustleton
We cover Bustleton and the neighborhoods around it, including Northeast Philadelphia, Rhawnhurst, Torresdale, and Fox Chase. If you’re just over the line in one of those areas, we can help there too. Serving Bustleton and the surrounding Far Northeast means we understand the housing stock and the chimney styles that come with it.
Serving Bustleton, PA – Our Local Coverage Area
We serve Bustleton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Bustleton
Almost always, yes. An insert vents differently than an open fireplace, and an unlined or oversized flue lets gases and heat reach the surrounding masonry while drafting poorly. A properly sized stainless liner fixes both. Call (833) 370-3312 for an exact quote; estimates are free.
You should see camera footage of your own flue before anyone recommends work. Ask for the video or photos and for the specific defect being corrected. If a quote can’t point to it on camera, don’t approve it. We document what we find and show it to you. Call (833) 370-3312 to book an assessment.
A Level 2 inspection is a camera-based look at the accessible flue and chimney interior, and it’s the right call after adding an appliance, buying a home, or after a chimney fire. In Bustleton’s older stacks it’s how we catch cracked tiles and open joints that aren’t visible from outside. Call (833) 370-3312 to schedule one.
It depends on how far the damage runs. A failed crown and spalling above the roofline with sound masonry below usually calls for a partial rebuild. Damage deep into the stack points to a full rebuild. Camera inspection and a look at the brick faces tell us which. Call (833) 370-3312 for a free estimate.
First-degree creosote is a light soot you brush off; third-degree is a hardened, glazed tar that a brush won’t touch. A flue with third-degree creosote has to be cleaned and evaluated before a liner goes in, or the liner just seals in the problem. Call (833) 370-3312 to have your flue checked.
If you’re in Bustleton and your chimney needs a liner, a partial rebuild, or a straight answer about whether the work can wait, call Chimney Sweep Tacony at (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.