Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Olney
If your cap is missing or your crown is cracked, water is already getting into the brick. We handle chimney cap and crown work across Olney, including the tight rowhouse blocks around Fisher Park, along the commercial stretch of 5th Street, and up toward Tabor Road. Olney’s attached homes share chimney stacks, so a cap job here takes more care than a suburban freestanding fireplace ever does. Call (833) 370-3312 for a free estimate, and we’ll tell you plainly whether the flue can take a cap or needs inspection first.
Key takeaways
- Caps and crowns on Olney rowhouses often sit over unlined coal-era flues, so we run a camera before quoting.
- A cracked crown or missing cap on one side of a party wall can push water and draft problems into your neighbor’s flue.
- We install multi-flue caps and repair and coat crowns; nothing is recommended without camera evidence you can see.
- Estimates are free, and the written estimate sets the final price.
Why Olney Homeowners Call Chimney Sweep Tacony for Chimney Cap & Crown
Olney has a strong local reputation for us because we understand the building stock. The 1910s to 1940s brick rowhouses and twins that make up most of the neighborhood weren’t built for today’s wood stoves or high-efficiency furnaces. They were built for coal. When a homeowner tells us the crown is crumbling, we already know what’s underneath it: soft old mortar, a shared stack, and very likely a flue that was never lined. That saves a lot of guesswork on the first visit.
Our technicians have up to 13 years of experience with exactly these chimneys. Olney customers tell us they appreciate the plain talk: we show them the camera footage, point at the cracked tile or the failed crown seat, and explain what can safely wait. Nothing gets upsold on a hunch. Response time to Olney is quick, and because we know the party-wall layout of the twins and rowhouses here, we quote a cap with the neighbor’s flue in mind too. That isn’t a courtesy; it’s just how the brick mass works in these blocks.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Olney
The bones of any Olney cap or crown job are deciding, honestly, whether the stack underneath is sound enough to cap. That’s why our inspections come first here. See our full chimney cap & crown lineup for the material details.
Cap Installation
A properly sized cap keeps rain, birds, and downdraft out of the flue. On Olney’s multi-flue stacks, that usually means a single cap sized to fit both openings with screened vents, not two mismatched singles. We set it so it vents correctly and sheds water clear of the shared party wall.

Cap Replacement
Old caps rust through or get knocked loose, and a single-flue cap that doesn’t cover the whole stack lets wind-driven rain in. When we replace one in Olney, we measure the full footprint of the stack first. That way the new cap seals the flue and shields both openings that share the chimney mass.

Crown Repair
The crown is the concrete or mortar slab on top that sheds water off the brick. In Olney’s old rowhouses it cracks at the edges where freeze-thaw works on the soft old mortar, and once it does, water goes straight into the party wall. We rebuild the crown to slope away from the stack, not puddle on it.

Crown Coating
Not every crown needs to be torn out. A crown that’s sound but surface-cracked can often be cleaned and coated to seal it, which is the cheaper path when the brick underneath is still solid. We’ll tell you honestly which option your Olney crown calls for, based on what the inspection shows.
Trusted Brands We Service in Olney
We install and work with recognized names in the professional chimney trade: Gelco crowns and coatings, Olympia Chimney caps and liners, and Famco and Copperfield components that other chimney contractors use every day. That material knowledge matters on Olney’s odd-sized stacks, where an off-the-shelf cap rarely fits. We don’t stock parts or run a warehouse. We spec the right component for your flue, order it, and come back to install it, which keeps turnaround fast and the fit right. When a crown needs a custom pour or a cap needs a custom fit, the brand behind the material shows in how long it lasts.
Common Chimney Cap & Crown Problems We See in Olney Homes
- Unlined or crumbling clay-tile flues under a new cap. Original clay tile in Olney stacks is often already cracked or offset, so capping an unsound flue just seals water in. That’s why the camera goes in first.
- Spalling mortar and a dropped crown seat. Soft old mortar in the shared stack spalls, the crown pulls away from the brick, and rain enters both units’ flues. The fix is repointing and a properly sloped crown, not a quick patch.
- Oversized or unsealed single caps. A cap that doesn’t seal the whole stack lets wind-driven rain and downdraft push creosote smell back through the damper into the living room. Common on the twins and rowhouses here.
- Missing caps letting efflorescence bloom. No cap means rain soaks the brick year after year, so summer humidity brings that musty, vinegar-like smell through the house. A sealed cap stops the water before it starts.
Pricing for Chimney Cap & Crown in Olney, PA
Here’s what typical cap and crown work runs in Olney’s market, so you have a number before you call. A custom multi-flue cap on a typical rowhouse stack usually runs $450 – $900, depending on stack width and whether the cap is stainless. A standard single-flue cap runs $180 – $350. Crown repair that rebuilds a cracked crown typically runs $400 – $850. A crown coating, when the crown is sound enough to seal instead of rebuild, usually runs $250 – $500. What moves the price most is the condition of the brick underneath: a crown that needs repointing first costs more than one that just needs a new slab. Every estimate is free, and the written estimate sets the final price. Call (833) 370-3312 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Olney
Olney sits close to several neighborhoods we work regularly, including Cheltenham Village, Frankford, Fox Chase, and Oxford Circle. The chimney stock in these areas is much like Olney’s, with plenty of attached brick stacks and old mortar that needs a careful look before anyone prices a cap. If you’re just outside Olney’s lines, you’re still in reach. Read about our broader Olney area coverage if you’re not sure whether we serve your block.
Serving Olney, PA – Our Local Coverage Area
We serve Olney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Olney
Because capping a flue that’s already cracked or unlined seals moisture inside instead of keeping it out. We run a camera so we can see the condition of the clay tile and smoke chamber before we recommend anything. You see the footage too, so nothing is recommended on faith. Call (833) 370-3312 for an exact quote; estimates are free.
Yes. Olney’s rowhouses and twins share a single brick chimney mass between attached units, so a missing cap or cracked crown on one side of the party wall can push water and draft problems into the neighbor’s flue. If your side is sealed but theirs isn’t, water still finds the shared brick. That’s why we look at both openings when we quote a cap.
The crown is the mortar or concrete slab on top of the chimney that sheds water away from the brick. On Olney’s soft, old brick and mortar, the freeze-thaw cycles of Philadelphia winters crack it at the edges. Once it cracks, water works its way into the shared stack. A properly sloped, rebuilt crown is the fix.
Possibly. First-degree creosote is a light, flaky soot that builds up even with occasional burning, and it’s the most common stage we find. It’s also the easiest to sweep. Only an inspection tells you for sure which stage you’re at, so skip guessing and let the camera show you.
Yes. Olney’s multi-flue stacks are often irregular in size, so a stock cap won’t seal correctly. We measure the full footprint, order a custom cap sized to both openings, and install it to vent properly.
What Olney’s Attached Stacks Mean for a Cap and Crown Job
Here’s the one thing that makes cap and crown work in Olney different from nearly anywhere else: the chimneys aren’t freestanding. In these tightly packed twins and rowhouses, the flues run inside a shared brick mass between attached units, and that changes everything about how the job should go.
A typical job on an Olney 1910s – 1940s brick rowhouse usually starts with a technician finding spalling brick and a hairline-cracked crown where freeze-thaw has worked on soft old mortar. Because the flues share that party-wall brick, the standard fix is a properly sized multi-flue cap with screened openings and a repointed, coated crown that sheds water away from the party wall. But that repair only makes sense after a camera run confirms the flue liner and smoke chamber are sound enough to cap and leave. Cap a bad flue and you’ve sealed the problem in; coat a crown that’s still shedding fine and you’ve spent money you didn’t need to. Those are the two failure modes we see most in Olney, and both come down to whether anyone actually looked inside the flue first.
That’s where most of the industry’s worst upselling happens, and it’s why we’re direct about it: nobody can tell you a flue is failing from the curb or from a photo of the crown. A lot of rowhouse flues are unlined or carry crumbling clay tile, and the appliances vented into them were never designed for what’s burning now. So don’t take a quote on faith from anyone, including us. Ask to see the footage. If a flue can safely take a cap and wait on the rest, we’ll say so, and tell you plainly which work can safely wait until another season.
Olney is 19120, and it’s a dense, mostly early-20th-century North Philadelphia rowhouse neighborhood. The original interior chimneys were built for coal and later converted to oil and gas. The humid Philadelphia summers bring the creosote and musty smells that send most residents calling a sweep, and the freeze-thaw winters crack crowns and spall brick. All of it lands on the same old stacks.
Book Your Olney Cap and Crown Estimate
If your cap is gone, your crown is cracked, or you just want to know whether it’s time, call us. We sweep, install and replace caps, repair and coat crowns, and run cameras so you see exactly what we see. Our technicians have up to 13 years of experience with chimneys like yours. Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.