Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Holmesburg
If you live in a Holmesburg rowhouse, your chimney cap and crown are doing harder work than most people realize. The brick stack rising from your roof is probably shared with the home attached to yours, which means a cracked crown or a missing cap isn’t just your problem. It’s your neighbor’s too. We work on Holmesburg chimneys every week, and we know the tight blocks, the low rooflines, and the party-wall stacks that make this neighborhood different from anywhere else in Philadelphia. Call (833) 370-3312 and we’ll get a free estimate on the books.
Why Holmesburg Homeowners Call Chimney Sweep Tacony for Chimney Cap & Crown
Holmesburg is dense, old, and built shoulder to shoulder. That’s what makes working here a specialty. Our technicians have up to 13 years of experience, and they’ve spent a good share of that time on rowhouse stacks where one masonry chimney serves two homes. We know how to scope both sides of a shared flue before we touch anything, and we know what a failed crown on a 1930s terrace looks like versus a patched one that’s just cosmetically worn.
When you call for chimney cap & crown work, we give you a written estimate before booking. The local pro is licensed and insured as their state requires. We don’t tell anyone they need a rebuild without showing them the photos first. That matters in a neighborhood where you and your neighbor share one stack. Our technicians have worked Holmesburg’s rowhouse blocks long enough to know the difference between a crown that’s failed and one that just needs a coating.
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Fast dispatch from 7am to 7pm gets us out to Holmesburg when you need us.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Holmesburg
Cap Installation
A proper cap keeps rain, birds, and downdraft out of your flue. On Holmesburg homes, most of the work is fitting a correctly sized cap to an older masonry stack that was never designed for one. We measure the flue opening, check that the crown is sound enough to anchor to, and install a cap that won’t rattle loose in a winter wind. If your low-roofline roof catches summer downdrafts, a well-fitted cap helps stop the creosote smell from backing down into the house.

Cap Replacement
Loose, rusted, or missing caps are common on Holmesburg roofs built between 1920 and 1960. The originals were often thin sheet metal that has long since corroded, and some stacks lost their caps entirely decades ago. We pull the old cap, check the flue top and crown for damage underneath, and install a replacement sized to the actual opening. If your neighbor’s stack is attached, we check their side too before we finish.

Crown Repair
The crown is the concrete or mortar cap at the very top of the chimney that sheds water away from the brick. On Holmesburg’s older stacks, the crown is usually the first thing to fail. Freeze-thaw winters here crack mortar and spall brick, and once the crown starts breaking up, water gets into the flue and the party-wall cavity. We rebuild crowns with a proper overhang and drip edge so water runs off the chimney and not down into your neighbor’s flue.

Crown Coating
When the crown has minor cracks but is still structurally sound, a professional-grade coating can seal it and extend its life. We use HeatShield crown coating, which is a recognized product in the chimney trade. Coating is cheaper than a full crown rebuild and often buys several more years before replacement is needed. We’ll tell you honestly which one your crown needs, and we’ll show you why.
Trusted Brands We Service in Holmesburg
We work with professional-grade materials from brands that chimney contractors across the country rely on. Famco and Copperfield multi-flue caps are sized for shared stacks and built to handle the wind and weather that come with a Philadelphia roofline. Where a crown needs more than mortar, HeatShield coating and Gelco sealants are options we use. We don’t claim to stock parts locally, but we install recognized components that hold up. If a cap or crown needs to be custom-sized, we order it in and get it fitted quickly, so you’re not left with an open flue for weeks.
Common Chimney Cap & Crown Problems We See in Holmesburg Homes
The phone calls we get from Holmesburg tend to fall into a few categories. Here’s what tends to go wrong on the neighborhood’s rowhouse and twin chimneys.
- Crown cracks on the party-wall stack. A failed crown on one side lets water track into the neighbor’s flue. That can cause smoke odor and damper corrosion in the adjoining unit, and the owner often mistakes it for their own chimney problem. We scope both sides of the stack before we call a job done.
- Terra-cotta flue tiles spalling and cracking. The original flue tiles in a 1920s Holmesburg home have been through nearly a century of freeze-thaw cycles. Even a good cap installed without addressing the crown or flue top won’t stop moisture from getting in and causing more spalling.
- A single-flue cap on a shared multi-flue stack. When a stack has two flues but only one cap, the second flue stays open. Birds get in, drafts come down, and the house gets creosote odor complaints in the summer. A correctly sized multi-flue cap closes that gap.
- Capped or abandoned coal-era fireplace flues. Many Holmesburg homes still have capped-off coal fireplace flues that were never properly evaluated before wood burning. Before you use a fireplace, we check that those flues are safe, lined, and capped correctly.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Holmesburg, PA
Pricing is set per job by the written estimate, and the estimate is free. Typical ranges for Holmesburg’s market are:
- Cap installation (single-flue): $200 – $450
- Cap replacement (including removal of the old cap): $250 – $500
- Multi-flue cap for a shared party-wall stack: $400 – $900
- Crown repair with a proper drip edge: $350 – $800
- Crown coating (minor cracks, crown still sound): $200 – $450
Cost is driven by how much of the crown has to be rebuilt, whether the stack serves two flues, and whether the cap needs to be custom-fit. What we won’t do is quote a rebuild before we’ve seen the crown. If we get up there and the crown just needs a coating, that’s what we’ll tell you.
We Also Serve Cities Near Holmesburg
We also work in nearby Mayfair, Rhawnhurst, Tacony, and Torresdale. The rowhouses and twins in those neighborhoods share the same party-wall challenges Holmesburg does, and our team knows the local housing stock. If you’re in any of them and want a chimney cap or crown inspected, call us and we’ll set up a free estimate.
Serving Holmesburg, PA – Our Local Coverage Area
We serve Holmesburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Holmesburg
Yes. Your side of the stack is yours to protect, even if the neighbor’s side looks intact from the ground. A crown failing on their side can still let water travel along the shared masonry and into your flue. We scope both sides of the stack before we recommend work, and we show you the photos so you can see what’s actually going on. Call (833) 370-3312 for an exact quote – estimates are free.
Look for crumbling mortar or chunks of brick missing at the very top of the stack, water staining down the chimney face, or efflorescence (a white powder) on the brick. Those are the usual signs on a crown that’s taken a century of freeze-thaw. The only way to know for sure is a roof-level look, which is part of a free estimate. Give us a call and we’ll come out.
A properly sized multi-flue cap is the right answer for a shared stack. Single-flue caps leave the second flue open, which invites bird entry and downdraft. Famco and Copperfield both make multi-flue caps that fit a typical Holmesburg party-wall stack. We size the cap to the actual flue openings, not to a standard dimension. Call us for a free estimate and we’ll tell you which size fits.
It depends on how far the cracks go. Minor cracking in a crown that’s still sound can be sealed with a HeatShield crown coating, which extends its life. Deep cracks and crumbling mortar mean the crown needs to be rebuilt. We won’t recommend a rebuild without showing you why the coating won’t hold. Call (833) 370-3312 for an exact quote.
That smell usually means moisture is getting into the flue and reactivating old creosote deposits. In a low-roofline Holmesburg block, summer humidity and downdraft pull that smell down into the house, and a missing or undersized cap makes it worse. A properly fitted cap, along with checking the crown for cracks, is the usual fix. A camera inspection lets you see the flue yourself before anything is recommended. Call us for a free estimate.
Get a Free Estimate on Your Holmesburg Chimney Cap and Crown
If your Holmesburg chimney stack hasn’t had a roof-level look in years, now is a good time to schedule one. We’ll scope the crown, check the cap, and look at both sides of an attached stack if you have one. Nothing gets recommended without camera evidence you can see for yourself, and we’ll say plainly when work can safely wait. Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.