Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bustleton
If you’ve noticed a crack running across the top of your chimney or a cap that’s rusted thin, a cap and crown job in Bustleton typically runs $450 to $2,400 depending on whether the crown can be coated or has to be rebuilt. We work on the post-war stone and brick homes throughout Bustleton, and we know how these chimneys fail: thin mortar crowns that crack through freeze-thaw cycles, missing caps that let in leaves and rain, and clay-tile flues that were never sized for the insert that got dropped in later. Call (833) 370-3312 and we’ll set up a look at the whole system, top to firebox. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Bustleton Homeowners Call Chimney Sweep Tacony for Chimney Cap & Crown
Most of the chimney work we do in Bustleton is on houses built between the 1950s and 1970s, and that matters. Those homes have masonry chimneys with clay-tile flues, and many have had a fireplace insert or wood stove retrofitted into a flue that was never lined to match. A generalist handyman looks at the cap, sees the crack, and quotes a rebuild. We look at the whole system first: camera down the flue, inspection of the crown, the mortar joints, the damper, and the cap’s sizing. Nothing gets recommended that you can’t see on the camera screen yourself.
That’s the standard we hold to across Bustleton, whether it’s a quick crown coating or a multi-flue cap installation on a larger stone chimney. Our technicians have up to 13 years of experience, and they work with recognized trade materials like Gelco and Olympia Chimney rather than whatever is on the shelf at a big-box store. We also serve the surrounding neighborhoods, and we schedule Bustleton jobs to fit the seasonal urgency: before burning season, not after a problem shows up mid-winter. If you want a straight answer about what’s actually wrong with your chimney cap and crown, call us. Estimates are free, and the price is set per job by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bustleton
We cover the top of the chimney as its own discipline, not as an afterthought to a sweep. Here’s what the work looks like in Bustleton’s mid-century housing stock.
Cap Installation in Bustleton
A properly sized stainless steel cap with a mesh screen keeps rain, leaves, and animals out of the flue, and in Bustleton’s fall leaf season that matters because debris in the flue blocks draft and gives creosote a place to build. We size the cap to the actual flue opening, not to a generic fit, which is where most of the trouble starts. If you’re already getting a sweep, cap installation can be worked into the same visit.

Cap Replacement in Bustleton
Many of the original caps on Bustleton homes are rusted through or undersized for the flue they sit on. We pull the old cap, check the crown underneath for water damage, and set a new stainless cap sized correctly. If the existing cap has been letting water in for years, we’ll show you the condition of the crown before anything else is quoted.

Crown Repair in Bustleton
The crown is the mortar slab at the very top that sheds water away from the brick. When it cracks, water gets into the chimney structure, rusts the damper, and starts working on the mortar joints. Crown repair in Bustleton means rebuilding the crown with proper slope so it drains, or using a flexible crown coating where the damage is surface-level and the crown is still structurally sound. Which one applies is a decision we make from what the camera and a close look at the crown show, not from a guess.

Crown Coating in Bustleton
A flexible crown coating seals small cracks and gives a sound crown another stretch of service, and it’s often the right call when the freeze-thaw cycles have opened up surface checking but the crown itself hasn’t failed. We use it as an option when it holds up, and we say plainly when a crown is too far gone for coating to last.
Our chimney cap & crown team handles multi-flue caps and custom caps too, which matters on the larger stone chimneys with more than one flue that show up on some Bustleton lots.
Trusted Brands We Service in Bustleton
The materials on top of a chimney have to hold up to decades of weather, so we work with brands the trade relies on. Our cap and crown work uses Gelco and Olympia Chimney components, and for liner issues that surface during the inspection we install DuraFlex flexible liner systems when a rigid liner won’t fit the flue. Famco and Copperfield components also come into play on certain jobs. We don’t claim to stock these locally; we spec the right part for your chimney and get it to the job. Professional-grade parts, installed by trained hands, and a clear explanation of why each part was chosen.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Bustleton Homes
The failures we find across Bustleton usually come down to age, weather, and what was or wasn’t done during an earlier retrofit.
- Cracked clay-tile flue liners. Repeated freeze-thaw cycles crack and spall the original clay tile, and the gaps let creosote and moisture into the masonry. You often can’t see it until a camera goes down the flue, which is why we don’t quote liner work without one.
- Thin, crumbling mortar crowns. Mid-century crowns were often thin mortar slabs, and decades of winter freeze and summer humidity have cracked and crumbled them. Water then runs into the chimney, rusts the damper, and softens the mortar joints.
- Missing or undersized caps. Many Bustleton chimneys have a cap that’s gone or too small for the flue opening. In fall, leaf debris packs into an open flue, cuts draft, and gives creosote somewhere to collect.
- Oversized flues behind insert retrofits. When a fireplace insert or wood stove went into an original clay-tile flue that was never properly sized for it, the oversized flue drafts poorly. A properly sized stainless liner is the usual fix, and a camera inspection confirms it before anyone commits.
Pricing for Chimney Cap & Crown in Bustleton, PA
Cap and crown work is priced per job, and the written estimate sets the final price. These ranges give you a realistic starting point for Bustleton’s market. A typical single-flue cap installation runs $275 to $575, while a multi-flue or custom stainless cap runs $450 to $1,100 depending on size and configuration. Crown repair, where the crown is rebuilt with proper slope, typically runs $400 to $900. Crown coating, for a crown that’s sound but showing surface cracks, runs $250 to $500. If the inspection turns up a cracked liner, that’s separate work and quoted separately, and only after you’ve seen the camera footage. A Level 2 camera inspection is included so you’re not paying for a guess. Call for a free estimate.
We Also Serve Cities Near Bustleton
We work throughout Bustleton and the surrounding neighborhoods of Northeast Philadelphia, Rhawnhurst, Torresdale, and Fox Chase. If you’re just over the line in any of those, we can schedule a look at your cap and crown on the same basis. The housing stock shifts a little from neighborhood to neighborhood, but the failure modes on these mid-century chimneys are close enough that we can help wherever you are nearby.
Serving Bustleton, PA – Our Local Coverage Area
We serve Bustleton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bustleton
Not automatically, but a cap that’s missing, rusted, or undersized for the flue is a real problem regardless of the insert, because it lets rain and debris into a flue that’s already doing a hard job. The insert question is separate: an insert dropped into an original clay-tile flue often needs a properly sized stainless liner to draft well, and the cap should be sized to whatever the flue actually is after that decision is made. We check both with the camera before quoting. Call (833) 370-3312 for a free estimate.
A crown that’s cracked usually shows it from the ground or from a ladder: a visible crack line across the top slab, crumbling mortar at the edges, or water staining on the brick just below it. Some cracks are hairline and still sound; others are open enough that water is getting in. The safe way to know which you have is to have the crown looked at up close, along with a camera look at the flue, so the recommendation is based on what’s actually there. We’ll show you what we see. Call for an exact quote.
A stainless steel cap with a mesh screen is the durable choice for Bustleton’s winters, because stainless handles repeated freeze-thaw without rusting through the way painted steel does. The cap needs to be sized to the flue opening, not oversized, so it sheds water away from the crown and keeps animals and leaves out. Gelco and Olympia Chimney components hold up well here. A properly fitted stainless cap on a sound crown is the combination that lasts. Call (833) 370-3312 and we’ll spec the right cap for your chimney.
No, a cap won’t stop creosote from forming, because creosote comes from the fire itself, not from the weather. What a cap does is keep rain, leaves, and animals out, and keep leaf debris from packing into the flue in fall, which can cut draft and let creosote collect. Creosote has to be removed by sweeping, not prevented by a cap. A cap protects the flue between cleanings. Call for an exact quote on a cap and a pre-season sweep.
A cap and crown can go on an unlined chimney, but an unlined flue still has to be dealt with, because an unlined flue lets creosote and moisture straight into the masonry. The right sequence is a camera inspection first, so you can see whether the flue is sound enough to keep, needs a HeatShield resurfacing, or needs a full liner. We don’t recommend liner work without camera evidence you can look at. That’s where the upselling happens in this trade, and we work the other way. Call (833) 370-3312 for a free estimate.
Whether your crown is cracking or your cap is gone, the first step is a look at the system with you watching the screen. Cap, crown, liner, firebox: we cover the complete chimney from top to bottom. Call (833) 370-3312 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Tacony.